hks

{"id":7007614238831,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline GT-R BNR32 (1989-1994)","handle":"hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-gt-r-bnr32-1989-1994-80300-an008","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 78(8)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: 220\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1515 \/ 456\u003cbr\u003e- Rear: 652 \/ 348\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: 0 ～ -68\u003cbr\u003e-- Rear: 0 ～ -63\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: 0 ～ -66\u003cbr\u003e-- Rear: 0 ～ -63\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline GT-R - BNR32 (1989-1991) RB26DETT\u003cbr\u003eNissan - Skyline GT-R - BNR32 (1991-1993) RB26DETT\u003cbr\u003eNissan - Skyline GT-R - BNR32 (1993-1994) RB26DETT\u003c!--split--\u003e","published_at":"2022-06-08T14:39:24+08:00","created_at":"2022-06-08T14:39:24+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1989","1990","1991","1992","1993","1994","coilovers-and-springs","dampening-and-height-adjustable","hks","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","tva"],"price":257640,"price_min":257640,"price_max":257640,"available":true,"price_varies":false,"compare_at_price":299520,"compare_at_price_min":299520,"compare_at_price_max":299520,"compare_at_price_varies":false,"variants":[{"id":40856876122223,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AN008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline GT-R BNR32 (1989-1994)","public_title":null,"options":["Default Title"],"price":257640,"weight":30000,"compare_at_price":299520,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_0203ee01-8e19-4621-84e6-d3f6a64c25b8.jpg?v=1654670364"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_0203ee01-8e19-4621-84e6-d3f6a64c25b8.jpg?v=1654670364","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline GT-R BNR32 (1989-1994) - 80300-AN008 - Rzcrewgarage","id":23495755726959,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_0203ee01-8e19-4621-84e6-d3f6a64c25b8.jpg?v=1654670364"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_0203ee01-8e19-4621-84e6-d3f6a64c25b8.jpg?v=1654670364","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 78(8)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: 220\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1515 \/ 456\u003cbr\u003e- Rear: 652 \/ 348\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: 0 ～ -68\u003cbr\u003e-- Rear: 0 ～ -63\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: 0 ～ -66\u003cbr\u003e-- Rear: 0 ～ -63\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline GT-R - BNR32 (1989-1991) RB26DETT\u003cbr\u003eNissan - Skyline GT-R - BNR32 (1991-1993) RB26DETT\u003cbr\u003eNissan - Skyline GT-R - BNR32 (1993-1994) RB26DETT\u003c!--split--\u003e"}

{"id":2125314031727,"title":"HKS - HIPERMAX IV GT Coilover Kit - Mazda RX-7 FD3S","handle":"hks-hipermax-iv-gt-coilovers-mazda-rx-7-fd3s-80230-az002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AZ002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AZ002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -67\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 135.3Nm\u003cbr\u003eCompression Setting: 36.3Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=78(8)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10.79Nm\u003cbr\u003eCompression Setting: 3.14Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AZ002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -67\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 135.3Nm\u003cbr\u003eCompression Setting: 36.3Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=78(8)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10.79Nm\u003cbr\u003eCompression Setting: 3.14Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:07:15+08:00","created_at":"2019-02-08T13:07:15+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","mazda","rx-7-fd3s-type-i-1991-1994-tt-13b-rew-r","rx-7-fd3s-type-ii-1994-1995-tt-13b-rew-r","rx-7-fd3s-type-iii-1994-1996-tt-13b-rew-r","rx-7-fd3s-type-iv-1996-1998-tt-13b-rew-r","rx-7-fd3s-type-v-1999-2000-tt-13b-rew-r"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025497845871,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AZ002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Mazda RX-7 FD3S","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8a574fec-b659-4685-b1a2-d47ecb2a40f5.jpg?v=1571709621"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8a574fec-b659-4685-b1a2-d47ecb2a40f5.jpg?v=1571709621","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Mazda RX-7 FD3S - 80230-AZ002 - RZCrewGarage","id":1850810204271,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8a574fec-b659-4685-b1a2-d47ecb2a40f5.jpg?v=1571709621"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_8a574fec-b659-4685-b1a2-d47ecb2a40f5.jpg?v=1571709621","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AZ002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AZ002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -67\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 135.3Nm\u003cbr\u003eCompression Setting: 36.3Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=78(8)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10.79Nm\u003cbr\u003eCompression Setting: 3.14Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AZ002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -67\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 135.3Nm\u003cbr\u003eCompression Setting: 36.3Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -24mm (Max Adjustment: 0 ~ -86\u003cbr\u003eSpring Rate: F=78(8)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10.79Nm\u003cbr\u003eCompression Setting: 3.14Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125314392175,"title":"HKS - HIPERMAX IV GT Coilover Kit - Mitsubishi Lancer Evolution CP9A","handle":"hks-hipermax-iv-gt-coilovers-mitsubishi-lancer-evolution-cp9a-80230-am003","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AM003\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AM003\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -46mm (Max Adjustment: -10 ~ -76\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 100Nm\u003cbr\u003eCompression Setting: 33Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0 ~ -66\u003cbr\u003eSpring Rate: F=69(7)\/R=59(6)kg\u003cbr\u003eRebound Setting: 7.3Nm\u003cbr\u003eCompression Setting: 2Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AM003\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -46mm (Max Adjustment: -10 ~ -76\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 100Nm\u003cbr\u003eCompression Setting: 33Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0 ~ -66\u003cbr\u003eSpring Rate: F=69(7)\/R=59(6)kg\u003cbr\u003eRebound Setting: 7.3Nm\u003cbr\u003eCompression Setting: 2Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:07:24+08:00","created_at":"2019-02-08T13:07:25+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","lancer-evolution-v-cp9a-1998-1999-tc-4g63t-2nd-gen-i4","lancer-evolution-vi-cp9a-1999-2001-tc-4g63t-2nd-gen-i4","mitsubishi"],"price":193800,"price_min":193800,"price_max":193800,"available":true,"price_varies":false,"compare_at_price":242280,"compare_at_price_min":242280,"compare_at_price_max":242280,"compare_at_price_varies":false,"variants":[{"id":20025498206319,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AM003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Mitsubishi Lancer Evolution CP9A","public_title":null,"options":["Default Title"],"price":193800,"weight":26000,"compare_at_price":242280,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_e0953221-48e2-468d-8955-f88d2a45d5e2.jpg?v=1571709621"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_e0953221-48e2-468d-8955-f88d2a45d5e2.jpg?v=1571709621","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Mitsubishi Lancer Evolution CP9A - 80230-AM003 - RZCrewGarage","id":1850810630255,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_e0953221-48e2-468d-8955-f88d2a45d5e2.jpg?v=1571709621"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_e0953221-48e2-468d-8955-f88d2a45d5e2.jpg?v=1571709621","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AM003\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AM003\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -46mm (Max Adjustment: -10 ~ -76\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 100Nm\u003cbr\u003eCompression Setting: 33Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0 ~ -66\u003cbr\u003eSpring Rate: F=69(7)\/R=59(6)kg\u003cbr\u003eRebound Setting: 7.3Nm\u003cbr\u003eCompression Setting: 2Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AM003\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -46mm (Max Adjustment: -10 ~ -76\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 100Nm\u003cbr\u003eCompression Setting: 33Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0 ~ -66\u003cbr\u003eSpring Rate: F=69(7)\/R=59(6)kg\u003cbr\u003eRebound Setting: 7.3Nm\u003cbr\u003eCompression Setting: 2Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125313081455,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan BNR32","handle":"hks-hipermax-iv-gt-coilovers-nissan-skyline-sedan-bnr32-80230-an008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN008\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN008\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 86.3Nm\u003cbr\u003eCompression Setting: 18.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -89\u003cbr\u003eSpring Rate: F=69(7)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 2.16Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN008\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 86.3Nm\u003cbr\u003eCompression Setting: 18.6Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -89\u003cbr\u003eSpring Rate: F=69(7)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 2.16Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:52+08:00","created_at":"2019-02-08T13:06:52+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1989","1990","1991","1992","1993","1994","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025496043631,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Skyline Sedan BNR32","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_ee576ddd-5973-4b11-bcc3-b3abdc3f53da.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_ee576ddd-5973-4b11-bcc3-b3abdc3f53da.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Skyline Sedan BNR32 - 80230-AN008 - RZCrewGarage","id":1850809188463,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_ee576ddd-5973-4b11-bcc3-b3abdc3f53da.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_ee576ddd-5973-4b11-bcc3-b3abdc3f53da.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN008\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN008\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 86.3Nm\u003cbr\u003eCompression Setting: 18.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -89\u003cbr\u003eSpring Rate: F=69(7)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 2.16Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN008\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: 0 ~ -64\u003cbr\u003eSpring Rate: 7kg\u003cbr\u003eRebound Setting: 86.3Nm\u003cbr\u003eCompression Setting: 18.6Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: 0 ~ -89\u003cbr\u003eSpring Rate: F=69(7)\/R=69(7)kg\u003cbr\u003eRebound Setting: 5.88Nm\u003cbr\u003eCompression Setting: 2.16Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312262255,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Chaser JZX90 TChaser","handle":"hks-hipermax-iv-gt-coilovers-toyota-chaser-jzx90-tchaser-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:30+08:00","created_at":"2019-02-08T13:06:30+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","chaser-jzx90-1jz-gte-1992-1996-tt-1jz-gte-i6","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495257199,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Chaser JZX90 TChaser","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_1ceac328-1f2f-42cf-a1ad-bcd3c64f603a.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_1ceac328-1f2f-42cf-a1ad-bcd3c64f603a.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Chaser JZX90 TChaser - 80230-AT009 - RZCrewGarage","id":1850808402031,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_1ceac328-1f2f-42cf-a1ad-bcd3c64f603a.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_1ceac328-1f2f-42cf-a1ad-bcd3c64f603a.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312295023,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Chaser JZX91Chaser","handle":"hks-hipermax-iv-gt-coilovers-toyota-chaser-jzx91chaser-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:31+08:00","created_at":"2019-02-08T13:06:31+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","chaser-jzx91-1992-1996-na-2jz-ge-i6","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495289967,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Chaser JZX91Chaser","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_bcedcf71-b864-4d7e-bbc6-f00f374fc9b9.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_bcedcf71-b864-4d7e-bbc6-f00f374fc9b9.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Chaser JZX91Chaser - 80230-AT009 - RZCrewGarage","id":1850808434799,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_bcedcf71-b864-4d7e-bbc6-f00f374fc9b9.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_bcedcf71-b864-4d7e-bbc6-f00f374fc9b9.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312360559,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Chaser SX90Chaser","handle":"hks-hipermax-iv-gt-coilovers-toyota-chaser-sx90chaser-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:31+08:00","created_at":"2019-02-08T13:06:32+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","chaser-sx90-1992-1996-na-4s-fe-i4","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495322735,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Chaser SX90Chaser","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_75e856f1-259f-43aa-b803-ab5388ff20e6.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_75e856f1-259f-43aa-b803-ab5388ff20e6.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Chaser SX90Chaser - 80230-AT009 - RZCrewGarage","id":1850808467567,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_75e856f1-259f-43aa-b803-ab5388ff20e6.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_75e856f1-259f-43aa-b803-ab5388ff20e6.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312131183,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Cresta JZX90 TCresta","handle":"hks-hipermax-iv-gt-coilovers-toyota-cresta-jzx90-tcresta-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:24+08:00","created_at":"2019-02-08T13:06:24+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","coilover-kits","coilovers-and-springs","cresta-jzx90-1jz-gte-1992-1996-tt-1jz-gte-i6","dampening-and-height-adjustable","hks","hks30","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495126127,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Cresta JZX90 TCresta","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2229a22a-c2ac-43b0-8463-a90c6a695d06.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2229a22a-c2ac-43b0-8463-a90c6a695d06.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Cresta JZX90 TCresta - 80230-AT009 - RZCrewGarage","id":1850808270959,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2229a22a-c2ac-43b0-8463-a90c6a695d06.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_2229a22a-c2ac-43b0-8463-a90c6a695d06.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312163951,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Cresta JZX91Cresta","handle":"hks-hipermax-iv-gt-coilovers-toyota-cresta-jzx91cresta-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:25+08:00","created_at":"2019-02-08T13:06:26+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","coilover-kits","coilovers-and-springs","cresta-jzx91-1992-1996-na-2jz-ge-i6","dampening-and-height-adjustable","hks","hks30","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495158895,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Cresta JZX91Cresta","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5e76f191-743a-4e41-88a1-488be1db2559.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5e76f191-743a-4e41-88a1-488be1db2559.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Cresta JZX91Cresta - 80230-AT009 - RZCrewGarage","id":1850808303727,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5e76f191-743a-4e41-88a1-488be1db2559.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5e76f191-743a-4e41-88a1-488be1db2559.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312491631,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II JZX90","handle":"hks-hipermax-iv-gt-coilovers-toyota-mark-ii-jzx90-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:36+08:00","created_at":"2019-02-08T13:06:36+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","mark-ii-jzx90-1jz-ge-1992-1996-na-1jz-ge-i6","mark-ii-jzx90-1jz-gte-1992-1996-tt-1jz-gte-i6","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495453807,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II JZX90","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_79bd54cd-75b1-481e-b776-619952bc918f.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_79bd54cd-75b1-481e-b776-619952bc918f.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Mark II JZX90 - 80230-AT009 - RZCrewGarage","id":1850808631407,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_79bd54cd-75b1-481e-b776-619952bc918f.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_79bd54cd-75b1-481e-b776-619952bc918f.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312524399,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II JZX91Mark II","handle":"hks-hipermax-iv-gt-coilovers-toyota-mark-ii-jzx91mark-ii-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:37+08:00","created_at":"2019-02-08T13:06:37+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","mark-ii-jzx91-1992-1996-na-2jz-ge-i6","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495486575,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II JZX91Mark II","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_402a39d9-9142-4ea0-8ea8-a5a6e9d3ba7c.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_402a39d9-9142-4ea0-8ea8-a5a6e9d3ba7c.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Mark II JZX91Mark II - 80230-AT009 - RZCrewGarage","id":1850808664175,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_402a39d9-9142-4ea0-8ea8-a5a6e9d3ba7c.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_402a39d9-9142-4ea0-8ea8-a5a6e9d3ba7c.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312557167,"title":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II SX90Mark II","handle":"hks-hipermax-iv-gt-coilovers-toyota-mark-ii-sx90mark-ii-80230-at009","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:38+08:00","created_at":"2019-02-08T13:06:38+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","mark-ii-sx90-1992-1996-na-4s-fe-i4","toyota"],"price":177360,"price_min":177360,"price_max":177360,"available":true,"price_varies":false,"compare_at_price":221760,"compare_at_price_min":221760,"compare_at_price_max":221760,"compare_at_price_varies":false,"variants":[{"id":20025495519343,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Toyota Mark II SX90Mark II","public_title":null,"options":["Default Title"],"price":177360,"weight":26000,"compare_at_price":221760,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_53d1297f-dd3a-4136-bb52-7b21a3e10296.jpg?v=1571709619"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_53d1297f-dd3a-4136-bb52-7b21a3e10296.jpg?v=1571709619","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Toyota Mark II SX90Mark II - 80230-AT009 - RZCrewGarage","id":1850808696943,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_53d1297f-dd3a-4136-bb52-7b21a3e10296.jpg?v=1571709619"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_53d1297f-dd3a-4136-bb52-7b21a3e10296.jpg?v=1571709619","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT009\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on JZX100(1JZ-GTE).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT009\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -33mm (Max Adjustment: 0 ~ -99\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 150Nm\u003cbr\u003eCompression Setting: 37Nm\u003chr\u003eHeight data is based on JZX100(1JZ-GTE).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -31mm (Max Adjustment: 0 ~ -119\u003cbr\u003eSpring Rate: F=98(10)\/R=78(8)kg\u003cbr\u003eRebound Setting: 10Nm\u003cbr\u003eCompression Setting: 2.3Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125310722159,"title":"HKS - HIPERMAX IV SP Coilover Kit - Mazda RX-7 FD3S","handle":"hks-hipermax-iv-sp-coilovers-mazda-rx-7-fd3s-80250-az001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AZ001\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AZ001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0mm ~ -67mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 310.9Nm\u003cbr\u003eCompression Setting: 59.8Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0mm ~ -88mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 18.93Nm\u003cbr\u003eCompression Setting: 3.92Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AZ001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0mm ~ -67mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 310.9Nm\u003cbr\u003eCompression Setting: 59.8Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0mm ~ -88mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 18.93Nm\u003cbr\u003eCompression Setting: 3.92Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:05:45+08:00","created_at":"2019-02-08T13:05:46+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks22","mazda","rx-7-fd3s-type-i-1991-1994-tt-13b-rew-r","rx-7-fd3s-type-ii-1994-1995-tt-13b-rew-r","rx-7-fd3s-type-iii-1994-1996-tt-13b-rew-r","rx-7-fd3s-type-iv-1996-1998-tt-13b-rew-r","rx-7-fd3s-type-v-1999-2000-tt-13b-rew-r"],"price":208440,"price_min":208440,"price_max":208440,"available":true,"price_varies":false,"compare_at_price":254160,"compare_at_price_min":254160,"compare_at_price_max":254160,"compare_at_price_varies":false,"variants":[{"id":20025493586031,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80250-AZ001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV SP Coilover Kit - Mazda RX-7 FD3S","public_title":null,"options":["Default Title"],"price":208440,"weight":26000,"compare_at_price":254160,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_bc5bfc99-cff7-43a1-8c9d-e90b43c669ed.jpg?v=1571709618"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_bc5bfc99-cff7-43a1-8c9d-e90b43c669ed.jpg?v=1571709618","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV SP Coilovers - Mazda RX-7 FD3S - 80250-AZ001 - RZCrewGarage","id":1850806894703,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_bc5bfc99-cff7-43a1-8c9d-e90b43c669ed.jpg?v=1571709618"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_bc5bfc99-cff7-43a1-8c9d-e90b43c669ed.jpg?v=1571709618","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AZ001\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AZ001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0mm ~ -67mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 310.9Nm\u003cbr\u003eCompression Setting: 59.8Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0mm ~ -88mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 18.93Nm\u003cbr\u003eCompression Setting: 3.92Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AZ001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: 0mm ~ -67mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 310.9Nm\u003cbr\u003eCompression Setting: 59.8Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: 0mm ~ -88mm\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 18.93Nm\u003cbr\u003eCompression Setting: 3.92Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125310460015,"title":"HKS - HIPERMAX IV SP Coilover Kit - Nissan Skyline Sedan BNR32","handle":"hks-hipermax-iv-sp-coilovers-nissan-skyline-sedan-bnr32-80250-an004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN004\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0mm ~ -92mm\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 190Nm\u003cbr\u003eCompression Setting: 50Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -25mm (Max Adjustment: 0mm ~ -86mm\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 7.5Nm\u003cbr\u003eCompression Setting: 3.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0mm ~ -92mm\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 190Nm\u003cbr\u003eCompression Setting: 50Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -25mm (Max Adjustment: 0mm ~ -86mm\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 7.5Nm\u003cbr\u003eCompression Setting: 3.5Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:05:37+08:00","created_at":"2019-02-08T13:05:38+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1989","1990","1991","1992","1993","1994","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks22","nissan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6"],"price":208440,"price_min":208440,"price_max":208440,"available":true,"price_varies":false,"compare_at_price":254160,"compare_at_price_min":254160,"compare_at_price_max":254160,"compare_at_price_varies":false,"variants":[{"id":20025493323887,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80250-AN004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV SP Coilover Kit - Nissan Skyline Sedan BNR32","public_title":null,"options":["Default Title"],"price":208440,"weight":26000,"compare_at_price":254160,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_fa9c4c01-28b4-43de-b76a-322111f820ae.jpg?v=1571709618"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_fa9c4c01-28b4-43de-b76a-322111f820ae.jpg?v=1571709618","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV SP Coilovers - Nissan Skyline Sedan BNR32 - 80250-AN004 - RZCrewGarage","id":1850806599791,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_fa9c4c01-28b4-43de-b76a-322111f820ae.jpg?v=1571709618"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_fa9c4c01-28b4-43de-b76a-322111f820ae.jpg?v=1571709618","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN004\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0mm ~ -92mm\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 190Nm\u003cbr\u003eCompression Setting: 50Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -25mm (Max Adjustment: 0mm ~ -86mm\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 7.5Nm\u003cbr\u003eCompression Setting: 3.5Nm\u003cbr\u003e The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN004\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0mm ~ -92mm\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 190Nm\u003cbr\u003eCompression Setting: 50Nm\u003chr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -25mm (Max Adjustment: 0mm ~ -86mm\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eRebound Setting: 7.5Nm\u003cbr\u003eCompression Setting: 3.5Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":9746756272403,"title":"HKS - HIPERMAX R Coilover Kit - Mazda RX-7 FD3S","handle":"hks-hipermax-r-coilovers-mazda-rx-7-fd3s-80310-az001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80310-AZ001\u003cbr\u003eType: R\u003cbr\u003eRef: 80310-AZ001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: (0 - -68)\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 164.8Nm\u003cbr\u003eCompression Setting: 54.9Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: (0 - -71)\u003cbr\u003eSpring Rate: 18kg\u003cbr\u003eRebound Setting: 11.57Nm\u003cbr\u003eCompression Setting: 5.59Nm\u003cbr\u003e \u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV SP release this series has unified the many different street based Hipermax merits and further improved this new flagship series as the Ultimate All-Rounder. Many aspects similar to the Hipermax S Series yet developed for more serious motorsport application. Exclusive SRF (Super Response Fluid), LVS (Low Vibration Spring) and Spring Retainer along with increased spring rates, revised spring changes, wider implementation of helper springs and full Pillow Ball upper mounts sets these apart from the Hipermax S Series.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-7 | FD3S TYPE III | 1994-1996 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE I | 1991-1994 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE II | 1994-1995 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE IV | 1996-1998 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE V | 1999-2000 | TT | 13B-REW | R\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-11-22T12:17:45+08:00","created_at":"2024-11-22T12:17:46+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","mazda","rx-7-fd3s-type-i-1991-1994-tt-13b-rew-r","rx-7-fd3s-type-ii-1994-1995-tt-13b-rew-r","rx-7-fd3s-type-iii-1994-1996-tt-13b-rew-r","rx-7-fd3s-type-iv-1996-1998-tt-13b-rew-r","rx-7-fd3s-type-v-1999-2000-tt-13b-rew-r","ws112"],"price":285000,"price_min":285000,"price_max":285000,"available":true,"price_varies":false,"compare_at_price":368800,"compare_at_price_min":368800,"compare_at_price_max":368800,"compare_at_price_varies":false,"variants":[{"id":50101378842899,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80310-AZ001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX R Coilover Kit - Mazda RX-7 FD3S","public_title":null,"options":["Default Title"],"price":285000,"weight":45000,"compare_at_price":368800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Hipermax_R_d2ea300e-0914-4883-87df-6800fa76e591.jpg?v=1732249066"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Hipermax_R_d2ea300e-0914-4883-87df-6800fa76e591.jpg?v=1732249066","options":["Title"],"media":[{"alt":"HKS - HIPERMAX R Coilovers - Mazda RX-7 FD3S - 80310-AZ001 - RZCrewGarage","id":40222683529491,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Hipermax_R_d2ea300e-0914-4883-87df-6800fa76e591.jpg?v=1732249066"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Hipermax_R_d2ea300e-0914-4883-87df-6800fa76e591.jpg?v=1732249066","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80310-AZ001\u003cbr\u003eType: R\u003cbr\u003eRef: 80310-AZ001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -29mm (Max Adjustment: (0 - -68)\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 164.8Nm\u003cbr\u003eCompression Setting: 54.9Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: (0 - -71)\u003cbr\u003eSpring Rate: 18kg\u003cbr\u003eRebound Setting: 11.57Nm\u003cbr\u003eCompression Setting: 5.59Nm\u003cbr\u003e \u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV SP release this series has unified the many different street based Hipermax merits and further improved this new flagship series as the Ultimate All-Rounder. Many aspects similar to the Hipermax S Series yet developed for more serious motorsport application. Exclusive SRF (Super Response Fluid), LVS (Low Vibration Spring) and Spring Retainer along with increased spring rates, revised spring changes, wider implementation of helper springs and full Pillow Ball upper mounts sets these apart from the Hipermax S Series.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-7 | FD3S TYPE III | 1994-1996 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE I | 1991-1994 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE II | 1994-1995 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE IV | 1996-1998 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE V | 1999-2000 | TT | 13B-REW | R\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":9746757255443,"title":"HKS - HIPERMAX R Coilover Kit - Mazda RX-7 FD3S","handle":"hks-hipermax-r-coilovers-mazda-rx-7-fd3s-80310-af001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80310-AF001\u003cbr\u003eType: R\u003cbr\u003eRef: 80310-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: (0 - -45)\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 118.2Nm\u003cbr\u003eCompression Setting: 61.8Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: (-1 - -53)\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 5.35Nm\u003cbr\u003eCompression Setting: 4.37Nm\u003cbr\u003e \u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV SP release this series has unified the many different street based Hipermax merits and further improved this new flagship series as the Ultimate All-Rounder. Many aspects similar to the Hipermax S Series yet developed for more serious motorsport application. Exclusive SRF (Super Response Fluid), LVS (Low Vibration Spring) and Spring Retainer along with increased spring rates, revised spring changes, wider implementation of helper springs and full Pillow Ball upper mounts sets these apart from the Hipermax S Series.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-7 | FD3S TYPE III | 1994-1996 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE I | 1991-1994 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE II | 1994-1995 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE IV | 1996-1998 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE V | 1999-2000 | TT | 13B-REW | R\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-11-22T12:18:13+08:00","created_at":"2024-11-22T12:18:14+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","JP1","mazda","rx-7-fd3s-type-i-1991-1994-tt-13b-rew-r","rx-7-fd3s-type-ii-1994-1995-tt-13b-rew-r","rx-7-fd3s-type-iii-1994-1996-tt-13b-rew-r","rx-7-fd3s-type-iv-1996-1998-tt-13b-rew-r","rx-7-fd3s-type-v-1999-2000-tt-13b-rew-r","ws111"],"price":277170,"price_min":277170,"price_max":277170,"available":true,"price_varies":false,"compare_at_price":357900,"compare_at_price_min":357900,"compare_at_price_max":357900,"compare_at_price_varies":false,"variants":[{"id":50101380088083,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80310-AF001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX R Coilover Kit - Mazda RX-7 FD3S","public_title":null,"options":["Default Title"],"price":277170,"weight":45000,"compare_at_price":357900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Hipermax_R_ac088f78-3f87-464e-a006-69d76004b5d9.jpg?v=1732249094"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Hipermax_R_ac088f78-3f87-464e-a006-69d76004b5d9.jpg?v=1732249094","options":["Title"],"media":[{"alt":"HKS - HIPERMAX R Coilovers - Mazda RX-7 FD3S - 80310-AF001 - RZCrewGarage","id":40222685495571,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Hipermax_R_ac088f78-3f87-464e-a006-69d76004b5d9.jpg?v=1732249094"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Hipermax_R_ac088f78-3f87-464e-a006-69d76004b5d9.jpg?v=1732249094","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80310-AF001\u003cbr\u003eType: R\u003cbr\u003eRef: 80310-AF001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -35mm (Max Adjustment: (0 - -45)\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eRebound Setting: 118.2Nm\u003cbr\u003eCompression Setting: 61.8Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -38mm (Max Adjustment: (-1 - -53)\u003cbr\u003eSpring Rate: 10kg\u003cbr\u003eRebound Setting: 5.35Nm\u003cbr\u003eCompression Setting: 4.37Nm\u003cbr\u003e \u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV SP release this series has unified the many different street based Hipermax merits and further improved this new flagship series as the Ultimate All-Rounder. Many aspects similar to the Hipermax S Series yet developed for more serious motorsport application. Exclusive SRF (Super Response Fluid), LVS (Low Vibration Spring) and Spring Retainer along with increased spring rates, revised spring changes, wider implementation of helper springs and full Pillow Ball upper mounts sets these apart from the Hipermax S Series.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-7 | FD3S TYPE III | 1994-1996 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE I | 1991-1994 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE II | 1994-1995 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE IV | 1996-1998 | TT | 13B-REW | R\u003cbr\u003eRX-7 | FD3S TYPE V | 1999-2000 | TT | 13B-REW | R\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":6941828186223,"title":"HKS Coilover Suspension Full Kit Hipermax S - Toyota Mark II\/Chaser\/Cresta GX100\/GX90\/JZX100\/JZX101\/JZX90\/JZX91\/SX90 (1992-2000)","handle":"hks-coilover-suspension-full-kit-hipermax-s-toyota-mark-ii-chaser-cresta-gx100-gx90-jzx100-jzx101-jzx90-jzx91-sx90-1992-2000-80300-at009","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 137(14)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: 220\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1500 \/ 650\u003cbr\u003e- Rear: 630 \/ 500\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: 0 ～ -96\u003cbr\u003e-- Rear: -1 ～ -85\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: 0 ～ -58\u003cbr\u003e-- Rear: -1 ～ -40This set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - GX100 (1996-1998) 1G-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - GX100 (1998-2000) 1G-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - GX90 (1992-1994) 1G-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - GX90 (1994-1996) 1G-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX100 (1996-1998) 1JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX100 (1998-2000) 1JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX100 (1996-1998) 1JZ-GTE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX100 (1998-2000) 1JZ-GTE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX101 (1996-1998) 2JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX101 (1998-2000) 2JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX90 (1992-1994) 1JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX90 (1994-1996) 1JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX90 (1992-1994) 1JZ-GTE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX90 (1994-1996) 1JZ-GTE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX91 (1992-1994) 2JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX91 (1994-1996) 2JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - SX90 (1992-1994) 4S-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - SX90 (1994-1996) 4S-FE\u003c!--split--\u003e","published_at":"2022-01-20T19:23:30+08:00","created_at":"2022-01-20T19:23:31+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","1997","1998","1999","2000","chaser-gx100-1996-2000-na-1g-fe-i6","chaser-gx90-1992-1996-na-1g-fe-i6","chaser-jzx100-1jz-ge-1996-2000-na-1jz-ge-i6","chaser-jzx100-1jz-gte-1996-2000-tt-1jz-gte-i6","chaser-jzx101-1996-2000-na-2jz-ge-i6","chaser-jzx90-1jz-ge-1992-1996-na-1jz-ge-i6","chaser-jzx90-1jz-gte-1992-1996-tt-1jz-gte-i6","chaser-jzx91-1992-1996-na-2jz-ge-i6","chaser-sx90-1992-1996-na-4s-fe-i4","coilovers-and-springs","cresta-gx100-1996-2000-na-1g-fe-i6","cresta-gx90-1992-1996-na-1g-fe-i6","cresta-jzx100-1jz-ge-1996-2000-na-1jz-ge-i6","cresta-jzx100-1jz-gte-1996-2000-tt-1jz-gte-i6","cresta-jzx101-1996-2000-na-2jz-ge-i6","cresta-jzx90-1jz-ge-1992-1996-na-1jz-ge-i6","cresta-jzx90-1jz-gte-1992-1996-tt-1jz-gte-i6","cresta-jzx91-1992-1996-na-2jz-ge-i6","cresta-sx90-1992-1996-na-4s-fe-i4","dampening-and-height-adjustable","hks","mark-ii-gx100-1996-2000-na-1g-fe-i6","mark-ii-gx90-1992-1996-na-1g-fe-i6","mark-ii-jzx100-1jz-ge-1996-2000-na-1jz-ge-i6","mark-ii-jzx100-1jz-gte-1996-2000-tt-1jz-gte-i6","mark-ii-jzx101-1996-2000-na-2jz-ge-i6","mark-ii-jzx90-1jz-ge-1992-1996-na-1jz-ge-i6","mark-ii-jzx90-1jz-gte-1992-1996-tt-1jz-gte-i6","mark-ii-jzx91-1992-1996-na-2jz-ge-i6","mark-ii-sx90-1992-1996-na-4s-fe-i4","toyota","tva","ws126"],"price":251328,"price_min":251328,"price_max":251328,"available":true,"price_varies":false,"compare_at_price":323400,"compare_at_price_min":323400,"compare_at_price_max":323400,"compare_at_price_varies":false,"variants":[{"id":40724903952495,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AT009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Coilover Suspension Full Kit Hipermax S - Toyota Mark II\/Chaser\/Cresta GX100\/GX90\/JZX100\/JZX101\/JZX90\/JZX91\/SX90 (1992-2000)","public_title":null,"options":["Default Title"],"price":251328,"weight":30000,"compare_at_price":323400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_7de8aa98-11a9-499a-9f53-7e19829d4e61.jpg?v=1642679782"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_7de8aa98-11a9-499a-9f53-7e19829d4e61.jpg?v=1642679782","options":["Title"],"media":[{"alt":"HKS Coilover Suspension Full Kit Hipermax S - Toyota Mark II\/Chaser\/Cresta GX100\/GX90\/JZX100\/JZX101\/JZX90\/JZX91\/SX90 (1992-2000) - 80300-AT009 - Rzcrew Europe","id":22957443776623,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_7de8aa98-11a9-499a-9f53-7e19829d4e61.jpg?v=1642679782"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_7de8aa98-11a9-499a-9f53-7e19829d4e61.jpg?v=1642679782","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 137(14)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: 220\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1500 \/ 650\u003cbr\u003e- Rear: 630 \/ 500\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: 0 ～ -96\u003cbr\u003e-- Rear: -1 ～ -85\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: 0 ～ -58\u003cbr\u003e-- Rear: -1 ～ -40This set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - GX100 (1996-1998) 1G-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - GX100 (1998-2000) 1G-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - GX90 (1992-1994) 1G-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - GX90 (1994-1996) 1G-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX100 (1996-1998) 1JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX100 (1998-2000) 1JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX100 (1996-1998) 1JZ-GTE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX100 (1998-2000) 1JZ-GTE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX101 (1996-1998) 2JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX101 (1998-2000) 2JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX90 (1992-1994) 1JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX90 (1994-1996) 1JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX90 (1992-1994) 1JZ-GTE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX90 (1994-1996) 1JZ-GTE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX91 (1992-1994) 2JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - JZX91 (1994-1996) 2JZ-GE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - SX90 (1992-1994) 4S-FE\u003cbr\u003eToyota - Mark II\/Chaser\/Cresta - SX90 (1994-1996) 4S-FE\u003c!--split--\u003e"}