{"id":8190381850899,"title":"Cusco - 16mm Rear Anti Roll Bar - Honda Odyssey RB2","handle":"cusco-16mm-rear-anti-roll-bar-honda-odyssey-rb2-364-311-b16","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 364 311 B16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16, 310? Compare To Standard *Standard ?12mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:54:19+08:00","created_at":"2023-03-20T14:54:19+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2003","2004","2005","2006","2007","2008","anti-roll-bars","cusco-japan","cusco-japan30","honda","JP1","odyssey-rb2-2003-2008-na-k24a2-i4","rear","steel","tva","ws126"],"price":41710,"price_min":41710,"price_max":41710,"available":true,"price_varies":false,"compare_at_price":48100,"compare_at_price_min":48100,"compare_at_price_max":48100,"compare_at_price_varies":false,"variants":[{"id":44654430290195,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"364 311 B16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 16mm Rear Anti Roll Bar - Honda Odyssey RB2","public_title":null,"options":["Default Title"],"price":41710,"weight":12000,"compare_at_price":48100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rear_Anti_roll_bar_with_bush_and_bracket_7edfd8f9-44e7-4dc6-a0c1-ae82803a181c.jpg?v=1679295259"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rear_Anti_roll_bar_with_bush_and_bracket_7edfd8f9-44e7-4dc6-a0c1-ae82803a181c.jpg?v=1679295259","options":["Title"],"media":[{"alt":"Cusco - 16mm Rear Anti Roll Bar - Honda Odyssey RB2 - 364 311 B16","id":33392635642131,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rear_Anti_roll_bar_with_bush_and_bracket_7edfd8f9-44e7-4dc6-a0c1-ae82803a181c.jpg?v=1679295259"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Rear_Anti_roll_bar_with_bush_and_bracket_7edfd8f9-44e7-4dc6-a0c1-ae82803a181c.jpg?v=1679295259","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 364 311 B16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16, 310? Compare To Standard *Standard ?12mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":8190381687059,"title":"Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RB1\/RB2","handle":"cusco-30mm-front-anti-roll-bar-honda-odyssey-rb1-rb2-360-311-a30","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 360 311 A30\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?30, 130? Compare To Standard *Standard ?27.2mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:54:14+08:00","created_at":"2023-03-20T14:54:15+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2003","2004","2005","2006","2007","2008","anti-roll-bars","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","steel","tva","ws126"],"price":48770,"price_min":48770,"price_max":48770,"available":true,"price_varies":false,"compare_at_price":58100,"compare_at_price_min":58100,"compare_at_price_max":58100,"compare_at_price_varies":false,"variants":[{"id":44654429864211,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"360 311 A30","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RB1\/RB2","public_title":null,"options":["Default Title"],"price":48770,"weight":12000,"compare_at_price":58100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_ef2d36c8-97ca-472b-b096-e3dd14cb4a76.jpg?v=1679295255"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_ef2d36c8-97ca-472b-b096-e3dd14cb4a76.jpg?v=1679295255","options":["Title"],"media":[{"alt":"Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RB1\/RB2 - 360 311 A30","id":33392634855699,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_ef2d36c8-97ca-472b-b096-e3dd14cb4a76.jpg?v=1679295255"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_ef2d36c8-97ca-472b-b096-e3dd14cb4a76.jpg?v=1679295255","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 360 311 A30\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?30, 130? Compare To Standard *Standard ?27.2mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":8190366712083,"title":"Cusco - Front Hybrid shaft - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"cusco-front-hybrid-shaft-honda-odyssey-rb1-rb2-rb3-rb4-360-542-s","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 360 542 S\u003cbr\u003eBar Type: Hybrid shaft\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:49:22+08:00","created_at":"2023-03-20T14:49:23+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","aluminium","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4","strut-bars","tva","ws126"],"price":27310,"price_min":27310,"price_max":27310,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":44654272676115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"360 542 S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Hybrid shaft - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":27310,"weight":9000,"compare_at_price":30400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/hybrid-shaft2_e991efb0-b970-49ca-b0e5-a9bb2fe1f7a9.jpg?v=1679294963"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/hybrid-shaft2_e991efb0-b970-49ca-b0e5-a9bb2fe1f7a9.jpg?v=1679294963","options":["Title"],"media":[{"alt":"Cusco - Front Hybrid shaft - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 360 542 S","id":33392565420307,"position":1,"preview_image":{"aspect_ratio":1.238,"height":484,"width":599,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/hybrid-shaft2_e991efb0-b970-49ca-b0e5-a9bb2fe1f7a9.jpg?v=1679294963"},"aspect_ratio":1.238,"height":484,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/hybrid-shaft2_e991efb0-b970-49ca-b0e5-a9bb2fe1f7a9.jpg?v=1679294963","width":599}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 360 542 S\u003cbr\u003eBar Type: Hybrid shaft\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e"}

{"id":8190366646547,"title":"Cusco - Front Hybrid strut brace - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"cusco-front-hybrid-strut-brace-honda-odyssey-rb1-rb2-rb3-rb4-360-542-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 360 542 A\u003cbr\u003eBar Type: Hybrid strut brace\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:49:20+08:00","created_at":"2023-03-20T14:49:21+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","aluminium","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4","strut-bars","tva","ws126"],"price":32600,"price_min":32600,"price_max":32600,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":44654272381203,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"360 542 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Hybrid strut brace - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":32600,"weight":9000,"compare_at_price":37900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Hybrid_strut_brace_ce9faae4-c85b-4151-a11a-a224104d39e0.jpg?v=1679294961"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Hybrid_strut_brace_ce9faae4-c85b-4151-a11a-a224104d39e0.jpg?v=1679294961","options":["Title"],"media":[{"alt":"Cusco - Front Hybrid strut brace - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 360 542 A","id":33392565223699,"position":1,"preview_image":{"aspect_ratio":1.499,"height":427,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Hybrid_strut_brace_ce9faae4-c85b-4151-a11a-a224104d39e0.jpg?v=1679294961"},"aspect_ratio":1.499,"height":427,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Hybrid_strut_brace_ce9faae4-c85b-4151-a11a-a224104d39e0.jpg?v=1679294961","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 360 542 A\u003cbr\u003eBar Type: Hybrid strut brace\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e"}

{"id":8190366548243,"title":"Cusco - Front Strut brace Type OS - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"cusco-front-strut-brace-type-os-honda-odyssey-rb1-rb2-rb3-rb4-360-540-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 360 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:49:19+08:00","created_at":"2023-03-20T14:49:19+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","aluminium","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654271430931,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"360 540 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type OS - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_3b87a398-01e9-43e7-b4a0-e5a34173075b.jpg?v=1679294960"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_3b87a398-01e9-43e7-b4a0-e5a34173075b.jpg?v=1679294960","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type OS - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 360 540 A","id":33392564994323,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_3b87a398-01e9-43e7-b4a0-e5a34173075b.jpg?v=1679294960"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_3b87a398-01e9-43e7-b4a0-e5a34173075b.jpg?v=1679294960","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 360 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e"}

{"id":8190188519699,"title":"Endless Chibi6 Big Brake kit - Honda - Odyssey RB1\/RB2","handle":"endless-chibi6-big-brake-kit-honda-odyssey-rb1-rb2-ecwrb1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Endless\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: 324×30mm\u003cbr\u003eCalipers Type: ??6Wagon\u003cbr\u003eRotors Type: 2PCS\u003cbr\u003eRotor face: Curving Slit\u003cbr\u003eBrake Pad type: RCP093\u003cbr\u003eNew reference number:ECZWRB1\u003cbr\u003e\u003cbr\u003eEndless has made their name with these big brake kits. Manufactured in Japan, These kits come complete including Rotors, Calipers, Brake lines and pads. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4,Odyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2023-03-20T11:55:52+08:00","created_at":"2023-03-20T11:55:53+08:00","vendor":"Endless","type":"Brake Calipers and Kits","tags":["2003","2004","2005","2006","2007","2008","324×30mm","front","honda","JP1","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","ws110"],"price":445030,"price_min":445030,"price_max":445030,"available":true,"price_varies":false,"compare_at_price":507700,"compare_at_price_min":507700,"compare_at_price_max":507700,"compare_at_price_varies":false,"variants":[{"id":44653605355795,"title":"SSM","option1":"SSM","option2":null,"option3":null,"sku":"ECWRB1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Endless Chibi6 Big Brake kit - Honda - Odyssey RB1\/RB2 - SSM","public_title":"SSM","options":["SSM"],"price":445030,"weight":33000,"compare_at_price":507700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44653605388563,"title":"MX 72","option1":"MX 72","option2":null,"option3":null,"sku":"ECWRB1-MX 72","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Endless Chibi6 Big Brake kit - Honda - Odyssey RB1\/RB2 - MX 72","public_title":"MX 72","options":["MX 72"],"price":445030,"weight":33000,"compare_at_price":507700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44653605421331,"title":"CC-RG","option1":"CC-RG","option2":null,"option3":null,"sku":"ECWRB1-CC-RG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Endless Chibi6 Big Brake kit - Honda - Odyssey RB1\/RB2 - CC-RG","public_title":"CC-RG","options":["CC-RG"],"price":445030,"weight":33000,"compare_at_price":507700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44653605454099,"title":"Type R","option1":"Type R","option2":null,"option3":null,"sku":"ECWRB1-Type R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Endless Chibi6 Big Brake kit - Honda - Odyssey RB1\/RB2 - Type R","public_title":"Type R","options":["Type R"],"price":445030,"weight":33000,"compare_at_price":507700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/chibi6_main_2919b3df-a85f-4755-b1ae-f1495b2676ed.jpg?v=1684745680","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Racing_c_main_bf7acaea-2245-4138-bc7b-7bd3856be981.jpg?v=1684745680"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/chibi6_main_2919b3df-a85f-4755-b1ae-f1495b2676ed.jpg?v=1684745680","options":["Brake Pads Type"],"media":[{"alt":"ECWRB1 - Rzcrewgarage","id":34071447961875,"position":1,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/chibi6_main_2919b3df-a85f-4755-b1ae-f1495b2676ed.jpg?v=1684745680"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/chibi6_main_2919b3df-a85f-4755-b1ae-f1495b2676ed.jpg?v=1684745680","width":600},{"alt":null,"id":34071447994643,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Racing_c_main_bf7acaea-2245-4138-bc7b-7bd3856be981.jpg?v=1684745680"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Racing_c_main_bf7acaea-2245-4138-bc7b-7bd3856be981.jpg?v=1684745680","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Endless\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: 324×30mm\u003cbr\u003eCalipers Type: ??6Wagon\u003cbr\u003eRotors Type: 2PCS\u003cbr\u003eRotor face: Curving Slit\u003cbr\u003eBrake Pad type: RCP093\u003cbr\u003eNew reference number:ECZWRB1\u003cbr\u003e\u003cbr\u003eEndless has made their name with these big brake kits. Manufactured in Japan, These kits come complete including Rotors, Calipers, Brake lines and pads. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4,Odyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":7032298995823,"title":"Blitz Carbon Power Air Cleaner Intake Kit - Honda - Odyssey RB2","handle":"blitz-carbon-power-air-cleaner-intake-kit-honda-odyssey-rb2-35121","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 35121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eThis unique air filter system provides a great combination of high performance, sound and high quality materials. The entire filtration element is made from a fine stainless steel capable of extremely high horsepower applications while also adding a sporty engine intake sound for all applications. The super fine mesh pattern has less restriction than any other filters, easy to clean and long lasting. This straightens the airflow and dramatically reduces aerodynamic tumble (restrictive turbulence). Finally, the combination of the carbon shield with the Blitz red almite ring also greatly improves the look for the engine bay. \u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFit-Jazz | GK5 | 2013-2018 | NA | L15B7 | I4\u003c!--split--\u003e","published_at":"2022-08-01T18:49:46+08:00","created_at":"2022-08-01T18:49:47+08:00","vendor":"Blitz","type":"Intake Kits","tags":["2003","2004","2005","2006","2007","2008","blitz","honda","intake-kits","JP1","odyssey-rb2-2003-2008-na-k24a2-i4","short-ram-intake","ws127"],"price":49590,"price_min":49590,"price_max":49590,"available":true,"price_varies":false,"compare_at_price":75100,"compare_at_price_min":75100,"compare_at_price_max":75100,"compare_at_price_varies":false,"variants":[{"id":40897811349615,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"35121","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz Carbon Power Air Cleaner Intake Kit - Honda - Odyssey RB2","public_title":null,"options":["Default Title"],"price":49590,"weight":3500,"compare_at_price":75100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_carbon_air_cleaner_kit_7909e03f-bc5b-4f2a-8d1f-536cfd827391.jpg?v=1684739047"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_carbon_air_cleaner_kit_7909e03f-bc5b-4f2a-8d1f-536cfd827391.jpg?v=1684739047","options":["Title"],"media":[{"alt":"Blitz Carbon Power Air Cleaner Intake Kit - Honda - Odyssey RB2 - 35121","id":34070284402963,"position":1,"preview_image":{"aspect_ratio":1.51,"height":659,"width":995,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_carbon_air_cleaner_kit_7909e03f-bc5b-4f2a-8d1f-536cfd827391.jpg?v=1684739047"},"aspect_ratio":1.51,"height":659,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_carbon_air_cleaner_kit_7909e03f-bc5b-4f2a-8d1f-536cfd827391.jpg?v=1684739047","width":995}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 35121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eThis unique air filter system provides a great combination of high performance, sound and high quality materials. The entire filtration element is made from a fine stainless steel capable of extremely high horsepower applications while also adding a sporty engine intake sound for all applications. The super fine mesh pattern has less restriction than any other filters, easy to clean and long lasting. This straightens the airflow and dramatically reduces aerodynamic tumble (restrictive turbulence). Finally, the combination of the carbon shield with the Blitz red almite ring also greatly improves the look for the engine bay. \u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFit-Jazz | GK5 | 2013-2018 | NA | L15B7 | I4\u003c!--split--\u003e"}

{"id":4479833374831,"title":"Super Spark - Power Ignition Harness - Honda - Odyssey RB1\/RB2","handle":"super-spark-power-ignition-harness-honda-odyssey-rb1-rb2-s4t07","description":"\u003cp\u003e#N\/A\u003c\/p\u003e","published_at":"2020-06-05T13:55:16+08:00","created_at":"2020-06-05T13:55:18+08:00","vendor":"Super Spark","type":"Ignition Coils Booster and Cables","tags":["2003","2004","2005","2006","2007","2008","direct-ignition-coils","honda","ignition-coils-booster-and-cables","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","RB1\/RB2","super-spark","tva"],"price":15000,"price_min":15000,"price_max":15000,"available":false,"price_varies":false,"compare_at_price":19200,"compare_at_price_min":19200,"compare_at_price_max":19200,"compare_at_price_varies":false,"variants":[{"id":31698462638191,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"S4T07","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Super Spark - Power Ignition Harness - Honda - Odyssey RB1\/RB2","public_title":null,"options":["Default Title"],"price":15000,"weight":800,"compare_at_price":19200,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Super-Spark_adc1eda6-1a58-4aa5-bf86-ea9bd0ea2980.jpg?v=1591336518"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Super-Spark_adc1eda6-1a58-4aa5-bf86-ea9bd0ea2980.jpg?v=1591336518","options":["Title"],"media":[{"alt":"Super Spark - Power Ignition Harness - Honda - Odyssey RB1\/RB2 - S4T07","id":6304036192367,"position":1,"preview_image":{"aspect_ratio":1.51,"height":3264,"width":4928,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Super-Spark_adc1eda6-1a58-4aa5-bf86-ea9bd0ea2980.jpg?v=1591336518"},"aspect_ratio":1.51,"height":3264,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Super-Spark_adc1eda6-1a58-4aa5-bf86-ea9bd0ea2980.jpg?v=1591336518","width":4928}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e#N\/A\u003c\/p\u003e"}

{"id":2206041702511,"title":"Spoon Rigid Collar Kit - Rear - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"spoon-rigid-collar-kit-rear-honda-odyssey-rb1-rb2-rb3-rb4-50300-rb1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RB1-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:06:19+08:00","created_at":"2019-04-24T12:06:19+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","collar-kits","honda","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4","RB1\/RB2\/RB3\/RB4","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638469357679,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-RB1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_9b80dfca-61b6-4db3-9247-9391e9078660.jpg?v=1571709660"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_9b80dfca-61b6-4db3-9247-9391e9078660.jpg?v=1571709660","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 50300-RB1-000 - RZCrewEurope","id":1967725346927,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_9b80dfca-61b6-4db3-9247-9391e9078660.jpg?v=1571709660"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_9b80dfca-61b6-4db3-9247-9391e9078660.jpg?v=1571709660","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RB1-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e"}

{"id":2206041669743,"title":"Spoon Rigid Collar Kit - Front - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"spoon-rigid-collar-kit-front-honda-odyssey-rb1-rb2-rb3-rb4-50261-rr1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-RR1-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:06:17+08:00","created_at":"2019-04-24T12:06:18+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","collar-kits","front","honda","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4","RB1\/RB2\/RB3\/RB4","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638469193839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-RR1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3cfcaa3c-20bb-410e-be40-2cec89646c8b.jpg?v=1571709660"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3cfcaa3c-20bb-410e-be40-2cec89646c8b.jpg?v=1571709660","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 50261-RR1-000 - RZCrewEurope","id":1967725314159,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3cfcaa3c-20bb-410e-be40-2cec89646c8b.jpg?v=1571709660"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3cfcaa3c-20bb-410e-be40-2cec89646c8b.jpg?v=1571709660","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-RR1-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003e"}

{"id":1778152112239,"title":"Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"cusco-japan-street-zero-a-coilover-kit-honda-odyssey-rb1-rb2-rb3-rb4-394-62n-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 394 62N CN\u003cbr\u003eType: Cusco Street Zero A Ref 394 62N CN\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -50 to -20 ? -60 to -30\u003cbr\u003eMaximum adjustment F\/R: -105 to 0 ? -92 to 0\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11\/12)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 14 or (12\/16)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Fitting info?*AFS model is suitable ; Height information is based on Absolute edition.\u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:54+08:00","created_at":"2018-10-25T23:31:55+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","dampening-and-height-adjustable","honda","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4"],"price":192720,"price_min":192720,"price_max":192720,"available":true,"price_varies":false,"compare_at_price":240960,"compare_at_price_min":240960,"compare_at_price_max":240960,"compare_at_price_varies":false,"variants":[{"id":16766380736623,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"394 62N CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":192720,"weight":26500,"compare_at_price":240960,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_9edda3ee-dee9-4c2e-a8b4-ee9da9488de2.jpg?v=1571709567"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_9edda3ee-dee9-4c2e-a8b4-ee9da9488de2.jpg?v=1571709567","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 394 62N CN - Rzcrewgarage","id":1287589396591,"position":1,"preview_image":{"aspect_ratio":1.645,"height":1084,"width":1783,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_9edda3ee-dee9-4c2e-a8b4-ee9da9488de2.jpg?v=1571709567"},"aspect_ratio":1.645,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_9edda3ee-dee9-4c2e-a8b4-ee9da9488de2.jpg?v=1571709567","width":1783}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 394 62N CN\u003cbr\u003eType: Cusco Street Zero A Ref 394 62N CN\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -50 to -20 ? -60 to -30\u003cbr\u003eMaximum adjustment F\/R: -105 to 0 ? -92 to 0\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11\/12)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 14 or (12\/16)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Fitting info?*AFS model is suitable ; Height information is based on Absolute edition.\u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1778152013935,"title":"Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"cusco-japan-street-zero-coilover-kit-honda-odyssey-rb1-rb2-rb3-rb4-394-62p-cb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 394 62P CB\u003cbr\u003eType: Street Zero Ref 394 62P CB\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -50 to -20 ? -60 to -30\u003cbr\u003eMaximum adjustment F\/R: -100 to -0 ? -88 to -0\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11\/12)\u003cbr\u003e\u003cbr\u003eRear Specs: - Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 14 or (12\/16)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Fitting info?*AFS model is suitable ; Height information is based on Absolute edition.\u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:51+08:00","created_at":"2018-10-25T23:31:53+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","height-adjustable","honda","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4"],"price":151440,"price_min":151440,"price_max":151440,"available":true,"price_varies":false,"compare_at_price":189240,"compare_at_price_min":189240,"compare_at_price_max":189240,"compare_at_price_varies":false,"variants":[{"id":16766379393135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"394 62P CB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":151440,"weight":26500,"compare_at_price":189240,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_bca420ac-67c2-4ce4-82a9-1bf4da01d28e.jpg?v=1571709567"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_bca420ac-67c2-4ce4-82a9-1bf4da01d28e.jpg?v=1571709567","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 394 62P CB - Rzcrewgarage","id":1287589331055,"position":1,"preview_image":{"aspect_ratio":1.644,"height":1084,"width":1782,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_bca420ac-67c2-4ce4-82a9-1bf4da01d28e.jpg?v=1571709567"},"aspect_ratio":1.644,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_bca420ac-67c2-4ce4-82a9-1bf4da01d28e.jpg?v=1571709567","width":1782}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 394 62P CB\u003cbr\u003eType: Street Zero Ref 394 62P CB\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -50 to -20 ? -60 to -30\u003cbr\u003eMaximum adjustment F\/R: -100 to -0 ? -88 to -0\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11\/12)\u003cbr\u003e\u003cbr\u003eRear Specs: - Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 14 or (12\/16)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Fitting info?*AFS model is suitable ; Height information is based on Absolute edition.\u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1778152177775,"title":"Cusco Japan - Street Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"cusco-japan-street-coilover-kit-honda-odyssey-rb1-rb2-rb3-rb4-394-62k-cbf","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 394 62K CBF\u003cbr\u003eType: Street Ref 394 62K CBF\u003cbr\u003eFront Specs: - Concentric\u003cbr\u003eRecommended Height F\/R: -75 to -40 ? -80 to -45\u003cbr\u003eMaximum adjustment F\/R: -105 to -40 ? -90 to -45\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11)\u003cbr\u003e\u003cbr\u003eRear Specs: 14 steps Concentric\u003cbr\u003eSpring Rates (Kg): 14 or (12)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Fitting info?*AFS model is suitable ; Height information is based on Absolute edition.\u003cbr\u003e\u003cbr\u003e The Cusco STREET series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is made as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at the lowest price.\u003cbr\u003e\n\u003cbr\u003e\nThe newly developed twin tubeshock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models.\n\u003cbr\u003e\nFactory upper mounts are re-used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback. Each coilover suspension is specially valved and dimensionally designed per vehicle application.\u003cbr\u003e\u003cbr\u003e\nLow compression twin-tube shock absorber w\/ redesigned base valve\u003cbr\u003e\nComfortable damper rate at any given vehicle height\u003cbr\u003e\nPrecision cut shock case thread with special coating\u003cbr\u003e\nQuiet operation\u003cbr\u003e\nRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003e\nEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e\n8 way rear adjustable shocks included with some models\u003cbr\u003e\nCUSCO’s most a ffordable street suspension system\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:56+08:00","created_at":"2018-10-25T23:31:57+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","height-adjustable","honda","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4"],"price":133680,"price_min":133680,"price_max":133680,"available":true,"price_varies":false,"compare_at_price":167040,"compare_at_price_min":167040,"compare_at_price_max":167040,"compare_at_price_varies":false,"variants":[{"id":16766381097071,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"394 62K CBF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":133680,"weight":26500,"compare_at_price":167040,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street_27f2602d-f502-4ed2-8c0d-6bf0ab245e33.jpg?v=1571709567"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street_27f2602d-f502-4ed2-8c0d-6bf0ab245e33.jpg?v=1571709567","options":["Title"],"media":[{"alt":"Cusco Japan - Street Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 394 62K CBF - Rzcrewgarage","id":1287589494895,"position":1,"preview_image":{"aspect_ratio":1.635,"height":540,"width":883,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street_27f2602d-f502-4ed2-8c0d-6bf0ab245e33.jpg?v=1571709567"},"aspect_ratio":1.635,"height":540,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street_27f2602d-f502-4ed2-8c0d-6bf0ab245e33.jpg?v=1571709567","width":883}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 394 62K CBF\u003cbr\u003eType: Street Ref 394 62K CBF\u003cbr\u003eFront Specs: - Concentric\u003cbr\u003eRecommended Height F\/R: -75 to -40 ? -80 to -45\u003cbr\u003eMaximum adjustment F\/R: -105 to -40 ? -90 to -45\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11)\u003cbr\u003e\u003cbr\u003eRear Specs: 14 steps Concentric\u003cbr\u003eSpring Rates (Kg): 14 or (12)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Fitting info?*AFS model is suitable ; Height information is based on Absolute edition.\u003cbr\u003e\u003cbr\u003e The Cusco STREET series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is made as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at the lowest price.\u003cbr\u003e\n\u003cbr\u003e\nThe newly developed twin tubeshock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models.\n\u003cbr\u003e\nFactory upper mounts are re-used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback. Each coilover suspension is specially valved and dimensionally designed per vehicle application.\u003cbr\u003e\u003cbr\u003e\nLow compression twin-tube shock absorber w\/ redesigned base valve\u003cbr\u003e\nComfortable damper rate at any given vehicle height\u003cbr\u003e\nPrecision cut shock case thread with special coating\u003cbr\u003e\nQuiet operation\u003cbr\u003e\nRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003e\nEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e\n8 way rear adjustable shocks included with some models\u003cbr\u003e\nCUSCO’s most a ffordable street suspension system\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1778151882863,"title":"Cusco Japan - Street A Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4","handle":"cusco-japan-street-a-coilover-kit-honda-odyssey-rb1-rb2-rb3-rb4-394-62j-cb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 394 62J CB\u003cbr\u003eType: Street A Ref 394 62J CB\u003cbr\u003eFront Specs: 40 steps Concentric\u003cbr\u003eRecommended Height F\/R: -75 to -40 ? -80 to -45\u003cbr\u003eMaximum adjustment F\/R: -85 to 0 ? -90 to 0\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Concentric\u003cbr\u003eSpring Rates (Kg): 14 or (12)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Fitting info?*AFS model is suitable ; Height information is based on Absolute edition.\u003cbr\u003e\u003cbr\u003e The STREET-A series suspension coilover system is designed to provide a lowered vehicle ride height while enabling damper adjustability. The newly developed 40 way damper adjustable shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition. *8 way rear dampers on selected models. \u003cbr\u003e\u003cbr\u003eThis suspension coilover is perfect for those who want a wide range of shock dampening adjustment but do not often take their vehicles to the race track. The standard coilover design enables this kit to be priced significantly lower than our full height adjustable systems.\u003cbr\u003e \u003cbr\u003eConbined with the ECON2 unit (sold separately), the damper rate can be adjusted from the drivers seat with a single touch of a button. Factory upper mounts are re-used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e40 way adjustable needle valve shock absorber with redesigned base valve \u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eStandard coilover structure\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:49+08:00","created_at":"2018-10-25T23:31:50+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","dampening-and-height-adjustable","honda","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","odyssey-rb3-2008-2013-na-k24a8-i4","odyssey-rb4-2008-2013-na-k24a8-i4"],"price":137520,"price_min":137520,"price_max":137520,"available":true,"price_varies":false,"compare_at_price":171960,"compare_at_price_min":171960,"compare_at_price_max":171960,"compare_at_price_varies":false,"variants":[{"id":16766378410095,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"394 62J CB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street A Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4","public_title":null,"options":["Default Title"],"price":137520,"weight":26500,"compare_at_price":171960,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-A_4eb9865e-bd32-46f4-a6a3-2bd5eb63060b.jpg?v=1571709567"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-A_4eb9865e-bd32-46f4-a6a3-2bd5eb63060b.jpg?v=1571709567","options":["Title"],"media":[{"alt":"Cusco Japan - Street A Coilover Kit - Honda Odyssey RB1\/RB2\/RB3\/RB4 - 394 62J CB - Rzcrewgarage","id":1287589232751,"position":1,"preview_image":{"aspect_ratio":1.638,"height":552,"width":904,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-A_4eb9865e-bd32-46f4-a6a3-2bd5eb63060b.jpg?v=1571709567"},"aspect_ratio":1.638,"height":552,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-A_4eb9865e-bd32-46f4-a6a3-2bd5eb63060b.jpg?v=1571709567","width":904}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 394 62J CB\u003cbr\u003eType: Street A Ref 394 62J CB\u003cbr\u003eFront Specs: 40 steps Concentric\u003cbr\u003eRecommended Height F\/R: -75 to -40 ? -80 to -45\u003cbr\u003eMaximum adjustment F\/R: -85 to 0 ? -90 to 0\u003cbr\u003eSpring Rates (Kg): 10 or (9\/11)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Concentric\u003cbr\u003eSpring Rates (Kg): 14 or (12)\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Fitting info?*AFS model is suitable ; Height information is based on Absolute edition.\u003cbr\u003e\u003cbr\u003e The STREET-A series suspension coilover system is designed to provide a lowered vehicle ride height while enabling damper adjustability. The newly developed 40 way damper adjustable shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition. *8 way rear dampers on selected models. \u003cbr\u003e\u003cbr\u003eThis suspension coilover is perfect for those who want a wide range of shock dampening adjustment but do not often take their vehicles to the race track. The standard coilover design enables this kit to be priced significantly lower than our full height adjustable systems.\u003cbr\u003e \u003cbr\u003eConbined with the ECON2 unit (sold separately), the damper rate can be adjusted from the drivers seat with a single touch of a button. Factory upper mounts are re-used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e40 way adjustable needle valve shock absorber with redesigned base valve \u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eStandard coilover structure\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB1 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003cbr\u003eOdyssey | RB3 | 2008-2013 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RB4 | 2008-2013 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1486230585455,"title":"Super Rigid Chassis Enhancement Ring Kit - Rear 8 Pieces - Honda Odyssey RB2","handle":"super-rigid-sr-c-179","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-179\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:02:04+08:00","created_at":"2018-09-03T16:02:04+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["2003","2004","2005","2006","2007","2008","collar-kits","honda","odyssey-rb2-2003-2008-na-k24a2-i4","rear","rigid-collars","super-rigid","super-rigid49.8967171230968","tva"],"price":12264,"price_min":12264,"price_max":12264,"available":true,"price_varies":false,"compare_at_price":14640,"compare_at_price_min":14640,"compare_at_price_max":14640,"compare_at_price_varies":false,"variants":[{"id":13250858713199,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-179","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Rear 8 Pieces - Honda Odyssey RB2","public_title":null,"options":["Default Title"],"price":12264,"weight":450,"compare_at_price":14640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SR-C-77_3f187a9e-67fe-4ef1-ac06-85af317919bd.jpg?v=1571709488"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SR-C-77_3f187a9e-67fe-4ef1-ac06-85af317919bd.jpg?v=1571709488","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-179 - RZCrewEurope","id":1967891841135,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SR-C-77_3f187a9e-67fe-4ef1-ac06-85af317919bd.jpg?v=1571709488"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SR-C-77_3f187a9e-67fe-4ef1-ac06-85af317919bd.jpg?v=1571709488","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-179\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":1486230454383,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 6 Pieces - Honda Odyssey RB2","handle":"super-rigid-sr-c-178","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-178\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:02:02+08:00","created_at":"2018-09-03T16:02:03+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["2003","2004","2005","2006","2007","2008","collar-kits","front","honda","odyssey-rb2-2003-2008-na-k24a2-i4","rigid-collars","super-rigid","super-rigid50.135020489931","tva"],"price":11472,"price_min":11472,"price_max":11472,"available":true,"price_varies":false,"compare_at_price":13680,"compare_at_price_min":13680,"compare_at_price_max":13680,"compare_at_price_varies":false,"variants":[{"id":13250858156143,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-178","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 6 Pieces - Honda Odyssey RB2","public_title":null,"options":["Default Title"],"price":11472,"weight":450,"compare_at_price":13680,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SR-C-77_0f9fcd99-137e-4d75-b93b-c51b5fbf2103.jpg?v=1571709488"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SR-C-77_0f9fcd99-137e-4d75-b93b-c51b5fbf2103.jpg?v=1571709488","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-178 - RZCrewEurope","id":1967891742831,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SR-C-77_0f9fcd99-137e-4d75-b93b-c51b5fbf2103.jpg?v=1571709488"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SR-C-77_0f9fcd99-137e-4d75-b93b-c51b5fbf2103.jpg?v=1571709488","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-178\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":1483832295535,"title":"Blitz SUS POWER LM-RED Intake Kit - Honda - Odyssey RB2","handle":"blitz-sus-power-lm-red-intake-kit-honda-odyssey-rb2-59121","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 59121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eBlitz SUS Power LM is a Core type air cleaner kit which produces high intake efficiency and cool suction sound with its two-layer fiber filter. Due to its conical design, The SUS Power LM is perfect to allow maximum air flow while minimising intake flow resistance.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003eThis kit is complete and come with all necessary items to fix it in your engine bay. Please note that most of the time this kit will use the stock suction intake pipe.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2018-09-02T20:36:43+08:00","created_at":"2018-09-02T20:36:44+08:00","vendor":"Blitz","type":"Intake Kits","tags":["2003","2004","2005","2006","2007","2008","blitz","honda","intake-kits","JP1","odyssey-rb2-2003-2008-na-k24a2-i4","short-ram-intake","ws126"],"price":26570,"price_min":26570,"price_max":26570,"available":true,"price_varies":false,"compare_at_price":38400,"compare_at_price_min":38400,"compare_at_price_max":38400,"compare_at_price_varies":false,"variants":[{"id":13228929908847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"59121","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz SUS POWER LM-RED Intake Kit - Honda - Odyssey RB2","public_title":null,"options":["Default Title"],"price":26570,"weight":3500,"compare_at_price":38400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_power_RED_4468bf77-13de-491e-86e7-7549b397ce53.jpg?v=1684738551"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_power_RED_4468bf77-13de-491e-86e7-7549b397ce53.jpg?v=1684738551","options":["Title"],"media":[{"alt":"Blitz SUS POWER LM-RED Intake Kit - Honda - Odyssey RB2 - 59121","id":34070193570067,"position":1,"preview_image":{"aspect_ratio":1.0,"height":935,"width":935,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_power_RED_4468bf77-13de-491e-86e7-7549b397ce53.jpg?v=1684738551"},"aspect_ratio":1.0,"height":935,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_power_RED_4468bf77-13de-491e-86e7-7549b397ce53.jpg?v=1684738551","width":935}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 59121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eBlitz SUS Power LM is a Core type air cleaner kit which produces high intake efficiency and cool suction sound with its two-layer fiber filter. Due to its conical design, The SUS Power LM is perfect to allow maximum air flow while minimising intake flow resistance.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003eThis kit is complete and come with all necessary items to fix it in your engine bay. Please note that most of the time this kit will use the stock suction intake pipe.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":1483832197231,"title":"Blitz SUS POWER LM Intake Kit - Honda - Odyssey RB2","handle":"blitz-sus-power-lm-intake-kit-honda-odyssey-rb2-56121","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 56121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eBlitz SUS Power LM is a Core type air cleaner kit which produces high intake efficiency and cool suction sound with its two-layer fiber filter. Due to its conical design, The SUS Power LM is perfect to allow maximum air flow while minimising intake flow resistance.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003eThis kit is complete and come with all necessary items to fix it in your engine bay. Please note that most of the time this kit will use the stock suction intake pipe.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2018-09-02T20:36:42+08:00","created_at":"2018-09-02T20:36:43+08:00","vendor":"Blitz","type":"Intake Kits","tags":["2003","2004","2005","2006","2007","2008","blitz","honda","intake-kits","JP1","odyssey-rb2-2003-2008-na-k24a2-i4","short-ram-intake","ws126"],"price":26570,"price_min":26570,"price_max":26570,"available":true,"price_varies":false,"compare_at_price":38400,"compare_at_price_min":38400,"compare_at_price_max":38400,"compare_at_price_varies":false,"variants":[{"id":13228929351791,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"56121","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz SUS POWER LM Intake Kit - Honda - Odyssey RB2","public_title":null,"options":["Default Title"],"price":26570,"weight":3500,"compare_at_price":38400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_power_LM_2a2ad14a-7a08-40e4-abfb-ac4c9cb7733c.jpg?v=1684738550"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_power_LM_2a2ad14a-7a08-40e4-abfb-ac4c9cb7733c.jpg?v=1684738550","options":["Title"],"media":[{"alt":"Blitz SUS POWER LM Intake Kit - Honda - Odyssey RB2 - 56121","id":34070193406227,"position":1,"preview_image":{"aspect_ratio":1.0,"height":935,"width":935,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_power_LM_2a2ad14a-7a08-40e4-abfb-ac4c9cb7733c.jpg?v=1684738550"},"aspect_ratio":1.0,"height":935,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_power_LM_2a2ad14a-7a08-40e4-abfb-ac4c9cb7733c.jpg?v=1684738550","width":935}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 56121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eBlitz SUS Power LM is a Core type air cleaner kit which produces high intake efficiency and cool suction sound with its two-layer fiber filter. Due to its conical design, The SUS Power LM is perfect to allow maximum air flow while minimising intake flow resistance.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003eThis kit is complete and come with all necessary items to fix it in your engine bay. Please note that most of the time this kit will use the stock suction intake pipe.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":1483832098927,"title":"Blitz SUS POWER Intake Kit - Honda - Odyssey RB2","handle":"blitz-sus-power-intake-kit-honda-odyssey-rb2-26121","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 26121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eBlitz SUS Power is a Core type air cleaner kit which produces high intake efficiency and cool suction sound with a huge SUS 304 stainless mesh filter. Due to its conical design, The SUS Power is perfect to allow maximum air flow while minimising intake flow resistance. The filter is washable for long term use.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003eThis kit is complete and come with all necessary items to fix it in your engine bay. Please note that most of the time this kit will use the stock suction intake pipe.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2018-09-02T20:36:41+08:00","created_at":"2018-09-02T20:36:42+08:00","vendor":"Blitz","type":"Intake Kits","tags":["2003","2004","2005","2006","2007","2008","blitz","honda","intake-kits","JP1","odyssey-rb2-2003-2008-na-k24a2-i4","short-ram-intake","ws126"],"price":31330,"price_min":31330,"price_max":31330,"available":true,"price_varies":false,"compare_at_price":46000,"compare_at_price_min":46000,"compare_at_price_max":46000,"compare_at_price_varies":false,"variants":[{"id":13228929187951,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"26121","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz SUS POWER Intake Kit - Honda - Odyssey RB2","public_title":null,"options":["Default Title"],"price":31330,"weight":3500,"compare_at_price":46000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_Power_b1ebf37e-79c1-4556-ad73-2b1a27796355.jpg?v=1684738549"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_Power_b1ebf37e-79c1-4556-ad73-2b1a27796355.jpg?v=1684738549","options":["Title"],"media":[{"alt":"Blitz SUS POWER Intake Kit - Honda - Odyssey RB2 - 26121","id":34070193045779,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1342,"width":1342,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_Power_b1ebf37e-79c1-4556-ad73-2b1a27796355.jpg?v=1684738549"},"aspect_ratio":1.0,"height":1342,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_SUS_Power_b1ebf37e-79c1-4556-ad73-2b1a27796355.jpg?v=1684738549","width":1342}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 26121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eBlitz SUS Power is a Core type air cleaner kit which produces high intake efficiency and cool suction sound with a huge SUS 304 stainless mesh filter. Due to its conical design, The SUS Power is perfect to allow maximum air flow while minimising intake flow resistance. The filter is washable for long term use.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003eThis kit is complete and come with all necessary items to fix it in your engine bay. Please note that most of the time this kit will use the stock suction intake pipe.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":1483832066159,"title":"Blitz ADVANCE POWER Intake Kit - Honda - Odyssey RB2","handle":"blitz-advance-power-intake-kit-honda-odyssey-rb2-42121","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 42121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eBlitz Advance Power is a Core type air cleaner kit which produces high intake efficiency and cool suction sound with a combination of aluminum cooling shield and stainless steel mesh filter. The adjustable shield enhances look and provide extra insulation. The filter is washable for long term use.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003eThis kit is complete and come with all necessary items to fix it in your engine bay. Please note that most of the time this kit will use the stock suction intake pipe.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e","published_at":"2018-09-02T20:36:40+08:00","created_at":"2018-09-02T20:36:41+08:00","vendor":"Blitz","type":"Intake Kits","tags":["2003","2004","2005","2006","2007","2008","blitz","honda","intake-kits","JP1","odyssey-rb2-2003-2008-na-k24a2-i4","short-ram-intake","ws126"],"price":44830,"price_min":44830,"price_max":44830,"available":true,"price_varies":false,"compare_at_price":67500,"compare_at_price_min":67500,"compare_at_price_max":67500,"compare_at_price_varies":false,"variants":[{"id":13228929122415,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"42121","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz ADVANCE POWER Intake Kit - Honda - Odyssey RB2","public_title":null,"options":["Default Title"],"price":44830,"weight":3500,"compare_at_price":67500,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_Advance_power_c45b57e8-0ebd-4da3-b94c-40e134683871.jpg?v=1684738547"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_Advance_power_c45b57e8-0ebd-4da3-b94c-40e134683871.jpg?v=1684738547","options":["Title"],"media":[{"alt":"Blitz ADVANCE POWER Intake Kit - Honda - Odyssey RB2 - 42121","id":34070192914707,"position":1,"preview_image":{"aspect_ratio":1.647,"height":850,"width":1400,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_Advance_power_c45b57e8-0ebd-4da3-b94c-40e134683871.jpg?v=1684738547"},"aspect_ratio":1.647,"height":850,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_Advance_power_c45b57e8-0ebd-4da3-b94c-40e134683871.jpg?v=1684738547","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003eReference Number: 42121\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eBlitz Advance Power is a Core type air cleaner kit which produces high intake efficiency and cool suction sound with a combination of aluminum cooling shield and stainless steel mesh filter. The adjustable shield enhances look and provide extra insulation. The filter is washable for long term use.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003eThis kit is complete and come with all necessary items to fix it in your engine bay. Please note that most of the time this kit will use the stock suction intake pipe.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RB2 | 2003-2008 | NA | K24A2 | I4\u003c!--split--\u003e"}

{"id":1443339436143,"title":"Blitz - ZZ-R DSC Coilover Kit - Honda Odyssey RB1 RB2","handle":"blitz-zz-r-dsc-coilovers-honda-odyssey-rb1-rb2-93783","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 93783\u003cbr\u003eType: ZZ-R DSC\u003cbr\u003eRef: 93783\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -80mm ~ -20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ -25mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e Please note that the DSC system has now been replaced by the DSC Plus system. The new following part number apply: 93783---\u0026gt;98783The ZZ-R DSC coilover series are standard ZZ-R coilovers enhanced with a motorized system to adjust the dampening rates from inside the passenger cabin.\u003cbr\u003e\nThey are full length adjustable, featuring up to 96-steps dampening force adjustment managed by the motorized system.\u003cbr\u003e\nThe precision of dampening can be adjusted from the car controller between 32\/64\/96 steps\u003cbr\u003e\nThe dampening of the coilovers can be controlled left\/right, or each coilover individually, and up to 5 settings can be stored in the controller.\u003cbr\u003e\nThe controller has a \"Highway Mode\" which auto adjusts the dampening according to the speed.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R DSC are rebuildable coilovers.\u003c!--split--\u003eType: ZZ-R DSC\u003cbr\u003eRef: 93783\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -80mm ~ -20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003chr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ -25mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2018-08-24T16:12:45+08:00","created_at":"2018-08-24T16:12:46+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","honda","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","ws142"],"price":167860,"price_min":167860,"price_max":167860,"available":false,"price_varies":false,"compare_at_price":254600,"compare_at_price_min":254600,"compare_at_price_max":254600,"compare_at_price_varies":false,"variants":[{"id":12964267360367,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"93783","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Blitz - ZZ-R DSC Coilover Kit - Honda Odyssey RB1 RB2","public_title":null,"options":["Default Title"],"price":167860,"weight":32500,"compare_at_price":254600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/ZZ-RDSC_750c96e8-7577-4206-9786-2fa560804858.jpg?v=1667726569"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/ZZ-RDSC_750c96e8-7577-4206-9786-2fa560804858.jpg?v=1667726569","options":["Title"],"media":[{"alt":"Blitz - ZZ-R DSC Coilovers - Honda Odyssey RB1,RB2 - 93783 - Rzcrewgarage","id":32125116416275,"position":1,"preview_image":{"aspect_ratio":1.673,"height":849,"width":1420,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/ZZ-RDSC_750c96e8-7577-4206-9786-2fa560804858.jpg?v=1667726569"},"aspect_ratio":1.673,"height":849,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/ZZ-RDSC_750c96e8-7577-4206-9786-2fa560804858.jpg?v=1667726569","width":1420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 93783\u003cbr\u003eType: ZZ-R DSC\u003cbr\u003eRef: 93783\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -80mm ~ -20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ -25mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e Please note that the DSC system has now been replaced by the DSC Plus system. The new following part number apply: 93783---\u0026gt;98783The ZZ-R DSC coilover series are standard ZZ-R coilovers enhanced with a motorized system to adjust the dampening rates from inside the passenger cabin.\u003cbr\u003e\nThey are full length adjustable, featuring up to 96-steps dampening force adjustment managed by the motorized system.\u003cbr\u003e\nThe precision of dampening can be adjusted from the car controller between 32\/64\/96 steps\u003cbr\u003e\nThe dampening of the coilovers can be controlled left\/right, or each coilover individually, and up to 5 settings can be stored in the controller.\u003cbr\u003e\nThe controller has a \"Highway Mode\" which auto adjusts the dampening according to the speed.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R DSC are rebuildable coilovers.\u003c!--split--\u003eType: ZZ-R DSC\u003cbr\u003eRef: 93783\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -80mm ~ -20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003chr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ -25mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":1443339370607,"title":"Blitz - ZZ-R Coilover Kit - Honda Odyssey RB1 RB2","handle":"blitz-zz-r-coilovers-honda-odyssey-rb1-rb2-92783","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 92783\u003cbr\u003eType: ZZ-R\u003cbr\u003eRef: 92783\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -80mm ~ -20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ -25mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e The Blitz ZZ-R coilovers are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R are rebuildable coilovers.\u003c!--split--\u003eType: ZZ-R\u003cbr\u003eRef: 92783\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -80mm ~ -20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003chr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ -25mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2018-08-24T16:12:44+08:00","created_at":"2018-08-24T16:12:45+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","honda","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","ws142"],"price":154236,"price_min":154236,"price_max":154236,"available":true,"price_varies":false,"compare_at_price":226680,"compare_at_price_min":226680,"compare_at_price_max":226680,"compare_at_price_varies":false,"variants":[{"id":12964266115183,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"92783","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz - ZZ-R Coilover Kit - Honda Odyssey RB1 RB2","public_title":null,"options":["Default Title"],"price":154236,"weight":30000,"compare_at_price":226680,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_ZZ-R_eb112527-7002-498e-82dc-ce13e62ed16f.jpg?v=1667726565"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_ZZ-R_eb112527-7002-498e-82dc-ce13e62ed16f.jpg?v=1667726565","options":["Title"],"media":[{"alt":"Blitz - ZZ-R Coilovers - Honda Odyssey RB1,RB2 - 92783 - Rzcrewgarage","id":32125116154131,"position":1,"preview_image":{"aspect_ratio":1.673,"height":837,"width":1400,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_ZZ-R_eb112527-7002-498e-82dc-ce13e62ed16f.jpg?v=1667726565"},"aspect_ratio":1.673,"height":837,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_ZZ-R_eb112527-7002-498e-82dc-ce13e62ed16f.jpg?v=1667726565","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 92783\u003cbr\u003eType: ZZ-R\u003cbr\u003eRef: 92783\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -80mm ~ -20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ -25mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e The Blitz ZZ-R coilovers are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R are rebuildable coilovers.\u003c!--split--\u003eType: ZZ-R\u003cbr\u003eRef: 92783\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -80mm ~ -20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003chr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 12kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ -25mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":1399430938735,"title":"Okada projects Plasma Direct ignition coils kit - HONDA RB 1\/2 (H15.10 - H21.9)","handle":"okada-projects-plasma-direct-ignition-coils-kit-honda-rb-1-2-h15-10-h21-9-sd224031r","description":"\u003cp\u003e#N\/A\u003c\/p\u003e","published_at":"2018-08-14T16:59:21+08:00","created_at":"2018-08-14T16:59:21+08:00","vendor":"Okada Projects","type":"Ignition Coils Booster and Cables","tags":["2003","2004","2005","2006","2007","2008","direct-ignition-coils","honda","ignition-coils-booster-and-cables","odyssey-rb1-2003-2008-na-k24a2-i4","odyssey-rb2-2003-2008-na-k24a2-i4","okada-projects","RB1\/RB2","tva"],"price":105360,"price_min":105360,"price_max":105360,"available":true,"price_varies":false,"compare_at_price":119280,"compare_at_price_min":119280,"compare_at_price_max":119280,"compare_at_price_varies":false,"variants":[{"id":12702047043695,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SD224031R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Okada projects Plasma Direct ignition coils kit - HONDA RB 1\/2 (H15.10 - H21.9)","public_title":null,"options":["Default Title"],"price":105360,"weight":1200,"compare_at_price":119280,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Plasma_direct_5f3d9f6b-05ee-4da2-840b-5c3c248ab299.jpg?v=1591336013"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Plasma_direct_5f3d9f6b-05ee-4da2-840b-5c3c248ab299.jpg?v=1591336013","options":["Title"],"media":[{"alt":"Okada projects Plasma Direct ignition coils kit - HONDA RB 1\/2 (H15.10 - H21.9) - SD224031R","id":6303934054511,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Plasma_direct_5f3d9f6b-05ee-4da2-840b-5c3c248ab299.jpg?v=1591336013"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Plasma_direct_5f3d9f6b-05ee-4da2-840b-5c3c248ab299.jpg?v=1591336013","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e#N\/A\u003c\/p\u003e"}