Cusco Japan

Sort by:
19% OFF
Cusco - 35mm Front Anti Roll Bar - Honda Odyssey RC1/RC2 - 397 311 A35
{"id":8190381424915,"title":"Cusco - 35mm Front Anti Roll Bar - Honda Odyssey RC1\/RC2","handle":"cusco-35mm-front-anti-roll-bar-honda-odyssey-rc1-rc2-397-311-a35","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 397 311 A35\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?35mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RC1 | 2013-2018 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RC2 | 2013-2018 | NA | K24A8 | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:54:06+08:00","created_at":"2023-03-20T14:54:07+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2013","2014","2015","2016","2017","2018","anti-roll-bars","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-rc1-2013-2018-na-k24a8-i4","odyssey-rc2-2013-2018-na-k24a8-i4","steel","tva","ws126"],"price":61130,"price_min":61130,"price_max":61130,"available":true,"price_varies":false,"compare_at_price":75800,"compare_at_price_min":75800,"compare_at_price_max":75800,"compare_at_price_varies":false,"variants":[{"id":44654429667603,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"397 311 A35","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 35mm Front Anti Roll Bar - Honda Odyssey RC1\/RC2","public_title":null,"options":["Default Title"],"price":61130,"weight":12000,"compare_at_price":75800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_b40ed8f3-5bc0-4833-8fe4-fb45d9fc6178.jpg?v=1679295247"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_b40ed8f3-5bc0-4833-8fe4-fb45d9fc6178.jpg?v=1679295247","options":["Title"],"media":[{"alt":"Cusco - 35mm Front Anti Roll Bar - Honda Odyssey RC1\/RC2 - 397 311 A35","id":33392633774355,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_b40ed8f3-5bc0-4833-8fe4-fb45d9fc6178.jpg?v=1679295247"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_b40ed8f3-5bc0-4833-8fe4-fb45d9fc6178.jpg?v=1679295247","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 397 311 A35\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?35mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RC1 | 2013-2018 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RC2 | 2013-2018 | NA | K24A8 | I4\u003c!--split--\u003e"}
Cusco - 35mm Front Anti Roll Bar - Honda Odyssey RC1/RC2 - 397 311 A35

Cusco - 35mm Front Anti Roll Bar - Honda Odyssey RC1/RC2

€611,30

Specifications:Manufacturer: Cusco JapanPart Number: 397 311 A35Bar Type: Anti Roll BarPosition: FrontPoints: 2 PointsMaterial: SteelManufacturer Notes: ?35mm. Bushings Included.The Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.The Cusco anti-sway bar will dramatically reduce body ...


More Info
12% OFF
Cusco - Front Strut brace Type OS - Honda Odyssey RC1/RC2 - 397 540 A
{"id":8190366777619,"title":"Cusco - Front Strut brace Type OS - Honda Odyssey RC1\/RC2","handle":"cusco-front-strut-brace-type-os-honda-odyssey-rc1-rc2-397-540-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 397 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RC1 | 2013-2018 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RC2 | 2013-2018 | NA | K24A8 | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:49:23+08:00","created_at":"2023-03-20T14:49:24+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2013","2014","2015","2016","2017","2018","aluminium","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-rc1-2013-2018-na-k24a8-i4","odyssey-rc2-2013-2018-na-k24a8-i4","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654273822995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"397 540 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type OS - Honda Odyssey RC1\/RC2","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_c8f99da2-6bc5-4321-9137-5c1eda945ecd.jpg?v=1679294964"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_c8f99da2-6bc5-4321-9137-5c1eda945ecd.jpg?v=1679294964","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type OS - Honda Odyssey RC1\/RC2 - 397 540 A","id":33392565518611,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_c8f99da2-6bc5-4321-9137-5c1eda945ecd.jpg?v=1679294964"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_c8f99da2-6bc5-4321-9137-5c1eda945ecd.jpg?v=1679294964","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 397 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RC1 | 2013-2018 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RC2 | 2013-2018 | NA | K24A8 | I4\u003c!--split--\u003e"}
Cusco - Front Strut brace Type OS - Honda Odyssey RC1/RC2 - 397 540 A

Cusco - Front Strut brace Type OS - Honda Odyssey RC1/RC2

€299,60

Specifications:Manufacturer: Cusco JapanPart Number: 397 540 ABar Type: Strut brace Type OSPosition: FrontPoints: 2 PointsMaterial: AluminiumCusco Strut Tower Bars Type OS, Oval Shaft designCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect bala...


More Info
20% OFF
Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RC1/RC2 - 397 62P CBF - Rzcrewgarage
{"id":1778152374383,"title":"Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RC1\/RC2","handle":"cusco-japan-street-zero-coilover-kit-honda-odyssey-rc1-rc2-397-62p-cbf","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 397 62P CBF\u003cbr\u003eType: Street Zero Ref 397 62P CBF\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -50 to -10 ? -75 to -40\u003cbr\u003eMaximum adjustment F\/R: -89 to 0 ? -76 to -33\u003cbr\u003eSpring Rates (Kg): 6\u003cbr\u003e\u003cbr\u003eRear Specs: 14 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 7\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Height information is based on Absolute edition. ; Auto Levelizer Adjust Rod?00B 628 E\u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RC1 | 2013-2018 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RC2 | 2013-2018 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:32:00+08:00","created_at":"2018-10-25T23:32:01+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","height-adjustable","honda","odyssey-rc1-2013-2018-na-k24a8-i4","odyssey-rc2-2013-2018-na-k24a8-i4"],"price":155280,"price_min":155280,"price_max":155280,"available":true,"price_varies":false,"compare_at_price":194160,"compare_at_price_min":194160,"compare_at_price_max":194160,"compare_at_price_varies":false,"variants":[{"id":16766381260911,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"397 62P CBF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RC1\/RC2","public_title":null,"options":["Default Title"],"price":155280,"weight":26500,"compare_at_price":194160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_028785bb-84b5-4604-808f-8830a813f997.jpg?v=1571709567"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_028785bb-84b5-4604-808f-8830a813f997.jpg?v=1571709567","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RC1\/RC2 - 397 62P CBF - Rzcrewgarage","id":1287589658735,"position":1,"preview_image":{"aspect_ratio":1.644,"height":1084,"width":1782,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_028785bb-84b5-4604-808f-8830a813f997.jpg?v=1571709567"},"aspect_ratio":1.644,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_028785bb-84b5-4604-808f-8830a813f997.jpg?v=1571709567","width":1782}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 397 62P CBF\u003cbr\u003eType: Street Zero Ref 397 62P CBF\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -50 to -10 ? -75 to -40\u003cbr\u003eMaximum adjustment F\/R: -89 to 0 ? -76 to -33\u003cbr\u003eSpring Rates (Kg): 6\u003cbr\u003e\u003cbr\u003eRear Specs: 14 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 7\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Height information is based on Absolute edition. ; Auto Levelizer Adjust Rod?00B 628 E\u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RC1 | 2013-2018 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RC2 | 2013-2018 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RC1/RC2 - 397 62P CBF - Rzcrewgarage

Cusco Japan - Street Zero Coilover Kit - Honda Odyssey RC1/RC2

€1.552,80

Specifications:Manufacturer: Cusco JapanPart Number: 397 62P CBFType: Street Zero Ref 397 62P CBFFront Specs: - Full-length AdjustableRecommended Height F/R: -50 to -10 ? -75 to -40Maximum adjustment F/R: -89 to 0 ? -76 to -33Spring Rates (Kg): 6Rear Specs: 14 steps Threaded spacerSpring Rates (Kg): 7Options: Additional Infos: Height informatio...


More Info
20% OFF
Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RC1/RC2 - 397 62N CN - Rzcrewgarage
{"id":1778152243311,"title":"Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RC1\/RC2","handle":"cusco-japan-street-zero-a-coilover-kit-honda-odyssey-rc1-rc2-397-62n-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 397 62N CN\u003cbr\u003eType: Cusco Street Zero A Ref 397 62N CN\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -50 to -10 ? -75 to -40\u003cbr\u003eMaximum adjustment F\/R: -50 to 0 ? -76 to 10\u003cbr\u003eSpring Rates (Kg): 6 or (7)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 7\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Height information is based on Absolute edition. ; Auto Levelizer Adjust Rod?00B 628 E\u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RC1 | 2013-2018 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RC2 | 2013-2018 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:31:58+08:00","created_at":"2018-10-25T23:31:59+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","dampening-and-height-adjustable","honda","odyssey-rc1-2013-2018-na-k24a8-i4","odyssey-rc2-2013-2018-na-k24a8-i4"],"price":192720,"price_min":192720,"price_max":192720,"available":true,"price_varies":false,"compare_at_price":240960,"compare_at_price_min":240960,"compare_at_price_max":240960,"compare_at_price_varies":false,"variants":[{"id":16766381162607,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"397 62N CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RC1\/RC2","public_title":null,"options":["Default Title"],"price":192720,"weight":26500,"compare_at_price":240960,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_3a350e9d-23e0-4604-a1df-a275b64c4044.jpg?v=1571709567"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_3a350e9d-23e0-4604-a1df-a275b64c4044.jpg?v=1571709567","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RC1\/RC2 - 397 62N CN - Rzcrewgarage","id":1287589560431,"position":1,"preview_image":{"aspect_ratio":1.645,"height":1084,"width":1783,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_3a350e9d-23e0-4604-a1df-a275b64c4044.jpg?v=1571709567"},"aspect_ratio":1.645,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_3a350e9d-23e0-4604-a1df-a275b64c4044.jpg?v=1571709567","width":1783}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 397 62N CN\u003cbr\u003eType: Cusco Street Zero A Ref 397 62N CN\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -50 to -10 ? -75 to -40\u003cbr\u003eMaximum adjustment F\/R: -50 to 0 ? -76 to 10\u003cbr\u003eSpring Rates (Kg): 6 or (7)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Threaded spacer\u003cbr\u003eSpring Rates (Kg): 7\u003cbr\u003eOptions: \u003cbr\u003eAdditional Infos: Height information is based on Absolute edition. ; Auto Levelizer Adjust Rod?00B 628 E\u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RC1 | 2013-2018 | NA | K24A8 | I4\u003cbr\u003eOdyssey | RC2 | 2013-2018 | NA | K24A8 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}
Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RC1/RC2 - 397 62N CN - Rzcrewgarage

Cusco Japan - Street Zero A Coilover Kit - Honda Odyssey RC1/RC2

€1.927,20

Specifications:Manufacturer: Cusco JapanPart Number: 397 62N CNType: Cusco Street Zero A Ref 397 62N CNFront Specs: 40 steps Full-length AdjustableRecommended Height F/R: -50 to -10 ? -75 to -40Maximum adjustment F/R: -50 to 0 ? -76 to 10Spring Rates (Kg): 6 or (7)Rear Specs: 40 steps Threaded spacerSpring Rates (Kg): 7Options: Additional Infos...


More Info