{"id":9817440583955,"title":"Recaro Japan - Base Frame Seat Rail Standard - MINI - JCW Cooper F56(JCW)","handle":"recaro-japan-base-frame-seat-rail-standard-mini-jcw-cooper-f56jcw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2014.003.1\/ 2014.003.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eSP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RS\/TS-#, the RS\/TS-G offset adapter set (product number 1700001J) allows the handlebar offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (For installation, please consult with your dealer regarding interference with the console (shift, etc.). For Sportster, Cross Sportster, Ergomed, and old LX, the reclining dial and B-pillar interfere with each other at the rear end of the slide rail. For RMS, adjust to the optimal position (front\/rear height, left\/right offset 0\/5\/10mm) with the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front\/rear height, left\/right offset 0\/5\/10mm) with the separately sold RCS side adapter before installation.\u003cbr\u003e\u003cbr\u003e(Note) This product cannot be installed on any seats other than those listed in the matching information below. F54, F55, F56, F57 (2014.002.1 and 2014.002.2 for F56 were integrated into this product number after June 16, 2016. The change is that a seat belt anchor has been newly installed on the door side for F54 and F55. There is no change in the position.) Side airbag canceller included. Compatibility with vehicle models and optional equipment has not been confirmed.\nInstallation on the passenger seat requires a Recaro seat equipped with SBR and a RECARO variable connector \u003cproduct number\u003e. For details, please contact a dealer familiar with this vehicle.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eNew structure frame. One-position type.\u003cbr\u003e\u003cbr\u003eThe side airbag function with built-in stock seat will be eliminated. The airbag warning light needs to be turned off. Compared to the lowest position of the stock seat height adjustment function, it is almost the same when using the middle position of the Recaro 3-step adjustment (13mm can be adjusted up and down by changing the position of the mounting hole) (when using the ST-JJ). The handle offset of the Recaro seat is 4mm closer to the door side than the stock seat. The amount of forward sliding is reduced by about 20 mm compared to the stock one, and the backward slide is also reduced by about 20 mm. If a Recaro seat is installed in the front passenger's seat, the occupant detection sensor will not work and the seatbelt warning light will not illuminate.\u003cbr\u003e\u003cbr\u003eThe side airbag function built into the factory seat will be lost. For driver's seat. Airbag warning light must be turned off. The seating position is approximately 4mm higher than the lowest position of the factory seat height adjustment function, and approximately 58mm lower than the highest position of the factory seat height adjustment function. (When using ST-JJ). The steering wheel offset is approximately 20mm closer to the door from the steering wheel center. The forward sliding amount is reduced by approximately 30mm compared to the factory.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eLX \/ LX- # \/ LX-VS \/ LX-VF \/ LX-VL \/ Ergomed \/ Ergomed C \/ Ergomed D \/ Ergomed E \/ Ergomed LD \/ Ergomed MV (IS-84 base)\u003cbr\u003e\t\nLX-F (based on IS-05)\u003cbr\u003e\t\nLS \/ LS- # \/ LT- #\t\u003cbr\u003e\nRMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\nNew Orthopedo (with Recaro Vent)\u003cbr\u003e\t\nRCS\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSR-2 late model \/ SR-3 \/ SR-4 \/ SR-5 \/ SR-VF \/ SR-IMPACT \/ SR-IMPACT Pro\u003cbr\u003e\t\nSP-A \/ SP-G \/ SP-G2 \/ SP-G3 \/ SP-GT \/ SP-GT2\tYou need to prepare the side adapter separately.\u003cbr\u003e\nAM19 TREND-J\u003cbr\u003e\nAM19 TREND-JJ\u003cbr\u003e\nAM19 TREND-JC\u003cbr\u003e\t\nAM19 STYLE-J\u003cbr\u003e\nAM19 STYLE-JJ\u003cbr\u003e\nAM19 STYLE-JC\u003cbr\u003e\t\nAM19 SPORT-J\u003cbr\u003e\nAM19 SPORT-JJ\u003cbr\u003e\nAM19 SPORT-JC\u003cbr\u003e\t\nAM19 TREND-JS\u003cbr\u003e\t\nAM19 STYLE-JS\u003cbr\u003e\t\nAM19 SPORT-JS\u003cbr\u003e\t\nAM19 TREND-D\u003cbr\u003e\nAM19 TREND-DC\u003cbr\u003e\t\nAM19 STYLE-D\u003cbr\u003e\nAM19 STYLE-DC\t\u003cbr\u003e\nAM19 SPORT-D \u003cbr\u003eAM19\u003cbr\u003e\t\nTS-G \/ RS-G \/ TS-W \/ RS-W\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSP-X\u003cbr\u003e\t\nSR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\t\nSportster \/ Cross Sportster\t\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eJCW Cooper | F56 | 2015-2017 | TC | B48A20O0 | I4\u003c!--split--\u003e\u003c\/product\u003e","published_at":"2025-02-05T17:19:39+08:00","created_at":"2025-02-05T17:19:41+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2015","2016","2017","F56(JCW)","jcw-cooper-f56-2015-2017-tc-b48a20o0-i4","JP1","mini","recaro-japan","Seat Rails","ws12"],"price":49670,"price_min":49670,"price_max":49670,"available":true,"price_varies":false,"compare_at_price":52800,"compare_at_price_min":52800,"compare_at_price_max":52800,"compare_at_price_varies":false,"variants":[{"id":50411988320531,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2014.003.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard - MINI - JCW Cooper F56(JCW) - Left","public_title":"Left","options":["Left"],"price":49670,"weight":17000,"compare_at_price":52800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":50411988353299,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2014.003.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard - MINI - JCW Cooper F56(JCW) - Right","public_title":"Right","options":["Right"],"price":49670,"weight":17000,"compare_at_price":52800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Recaro_seat_rail_bb6fdacc-b912-4249-8925-d2c494d9790a.jpg?v=1738747181","\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Recaro_seat_rail_f57e43fe-a8e4-473b-8f7f-d9425fea595e.jpg?v=1738747181"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Recaro_seat_rail_bb6fdacc-b912-4249-8925-d2c494d9790a.jpg?v=1738747181","options":["Side"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard - MINI - JCW Cooper F56(JCW)","id":40584172273939,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Recaro_seat_rail_bb6fdacc-b912-4249-8925-d2c494d9790a.jpg?v=1738747181"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Recaro_seat_rail_bb6fdacc-b912-4249-8925-d2c494d9790a.jpg?v=1738747181","width":640},{"alt":null,"id":40584172306707,"position":2,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Recaro_seat_rail_f57e43fe-a8e4-473b-8f7f-d9425fea595e.jpg?v=1738747181"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/files\/Recaro_seat_rail_f57e43fe-a8e4-473b-8f7f-d9425fea595e.jpg?v=1738747181","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2014.003.1\/ 2014.003.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eSP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RS\/TS-#, the RS\/TS-G offset adapter set (product number 1700001J) allows the handlebar offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (For installation, please consult with your dealer regarding interference with the console (shift, etc.). For Sportster, Cross Sportster, Ergomed, and old LX, the reclining dial and B-pillar interfere with each other at the rear end of the slide rail. For RMS, adjust to the optimal position (front\/rear height, left\/right offset 0\/5\/10mm) with the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front\/rear height, left\/right offset 0\/5\/10mm) with the separately sold RCS side adapter before installation.\u003cbr\u003e\u003cbr\u003e(Note) This product cannot be installed on any seats other than those listed in the matching information below. F54, F55, F56, F57 (2014.002.1 and 2014.002.2 for F56 were integrated into this product number after June 16, 2016. The change is that a seat belt anchor has been newly installed on the door side for F54 and F55. There is no change in the position.) Side airbag canceller included. Compatibility with vehicle models and optional equipment has not been confirmed.\nInstallation on the passenger seat requires a Recaro seat equipped with SBR and a RECARO variable connector \u003cproduct number\u003e. For details, please contact a dealer familiar with this vehicle.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eNew structure frame. One-position type.\u003cbr\u003e\u003cbr\u003eThe side airbag function with built-in stock seat will be eliminated. The airbag warning light needs to be turned off. Compared to the lowest position of the stock seat height adjustment function, it is almost the same when using the middle position of the Recaro 3-step adjustment (13mm can be adjusted up and down by changing the position of the mounting hole) (when using the ST-JJ). The handle offset of the Recaro seat is 4mm closer to the door side than the stock seat. The amount of forward sliding is reduced by about 20 mm compared to the stock one, and the backward slide is also reduced by about 20 mm. If a Recaro seat is installed in the front passenger's seat, the occupant detection sensor will not work and the seatbelt warning light will not illuminate.\u003cbr\u003e\u003cbr\u003eThe side airbag function built into the factory seat will be lost. For driver's seat. Airbag warning light must be turned off. The seating position is approximately 4mm higher than the lowest position of the factory seat height adjustment function, and approximately 58mm lower than the highest position of the factory seat height adjustment function. (When using ST-JJ). The steering wheel offset is approximately 20mm closer to the door from the steering wheel center. The forward sliding amount is reduced by approximately 30mm compared to the factory.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eLX \/ LX- # \/ LX-VS \/ LX-VF \/ LX-VL \/ Ergomed \/ Ergomed C \/ Ergomed D \/ Ergomed E \/ Ergomed LD \/ Ergomed MV (IS-84 base)\u003cbr\u003e\t\nLX-F (based on IS-05)\u003cbr\u003e\t\nLS \/ LS- # \/ LT- #\t\u003cbr\u003e\nRMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\nNew Orthopedo (with Recaro Vent)\u003cbr\u003e\t\nRCS\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSR-2 late model \/ SR-3 \/ SR-4 \/ SR-5 \/ SR-VF \/ SR-IMPACT \/ SR-IMPACT Pro\u003cbr\u003e\t\nSP-A \/ SP-G \/ SP-G2 \/ SP-G3 \/ SP-GT \/ SP-GT2\tYou need to prepare the side adapter separately.\u003cbr\u003e\nAM19 TREND-J\u003cbr\u003e\nAM19 TREND-JJ\u003cbr\u003e\nAM19 TREND-JC\u003cbr\u003e\t\nAM19 STYLE-J\u003cbr\u003e\nAM19 STYLE-JJ\u003cbr\u003e\nAM19 STYLE-JC\u003cbr\u003e\t\nAM19 SPORT-J\u003cbr\u003e\nAM19 SPORT-JJ\u003cbr\u003e\nAM19 SPORT-JC\u003cbr\u003e\t\nAM19 TREND-JS\u003cbr\u003e\t\nAM19 STYLE-JS\u003cbr\u003e\t\nAM19 SPORT-JS\u003cbr\u003e\t\nAM19 TREND-D\u003cbr\u003e\nAM19 TREND-DC\u003cbr\u003e\t\nAM19 STYLE-D\u003cbr\u003e\nAM19 STYLE-DC\t\u003cbr\u003e\nAM19 SPORT-D \u003cbr\u003eAM19\u003cbr\u003e\t\nTS-G \/ RS-G \/ TS-W \/ RS-W\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSP-X\u003cbr\u003e\t\nSR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\t\nSportster \/ Cross Sportster\t\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eJCW Cooper | F56 | 2015-2017 | TC | B48A20O0 | I4\u003c!--split--\u003e\u003c\/product\u003e"}

Recaro Japan - Base Frame Seat Rail Standard - MINI - JCW Cooper F56(JCW)

Check products, lead time and fitting infos in the tabs below!
Sku: 2014.003.1
Vendor: Recaro Japan
Availability: 15 to 25 days Lead Time.
Shipping time is additional.
€496,70 €528,00
Maximum quantity available reached.
Specifications:
Manufacturer: Recaro Japan
Reference Number: 2014.003.1/ 2014.003.2

Position:
SP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RS/TS-#, the RS/TS-G offset adapter set (product number 1700001J) allows the handlebar offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (For installation, please consult with your dealer regarding interference with the console (shift, etc.). For Sportster, Cross Sportster, Ergomed, and old LX, the reclining dial and B-pillar interfere with each other at the rear end of the slide rail. For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RCS side adapter before installation.

(Note) This product cannot be installed on any seats other than those listed in the matching information below. F54, F55, F56, F57 (2014.002.1 and 2014.002.2 for F56 were integrated into this product number after June 16, 2016. The change is that a seat belt anchor has been newly installed on the door side for F54 and F55. There is no change in the position.) Side airbag canceller included. Compatibility with vehicle models and optional equipment has not been confirmed. Installation on the passenger seat requires a Recaro seat equipped with SBR and a RECARO variable connector . For details, please contact a dealer familiar with this vehicle.
Notes and Remarks:
New structure frame. One-position type.

The side airbag function with built-in stock seat will be eliminated. The airbag warning light needs to be turned off. Compared to the lowest position of the stock seat height adjustment function, it is almost the same when using the middle position of the Recaro 3-step adjustment (13mm can be adjusted up and down by changing the position of the mounting hole) (when using the ST-JJ). The handle offset of the Recaro seat is 4mm closer to the door side than the stock seat. The amount of forward sliding is reduced by about 20 mm compared to the stock one, and the backward slide is also reduced by about 20 mm. If a Recaro seat is installed in the front passenger's seat, the occupant detection sensor will not work and the seatbelt warning light will not illuminate.

The side airbag function built into the factory seat will be lost. For driver's seat. Airbag warning light must be turned off. The seating position is approximately 4mm higher than the lowest position of the factory seat height adjustment function, and approximately 58mm lower than the highest position of the factory seat height adjustment function. (When using ST-JJ). The steering wheel offset is approximately 20mm closer to the door from the steering wheel center. The forward sliding amount is reduced by approximately 30mm compared to the factory.

Seat Fitting:
This seat rail fits:

LX / LX- # / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
LX-F (based on IS-05)
LS / LS- # / LT- #
RMS2600A / 2700G You need to prepare the side adapter separately.
New Orthopedo (with Recaro Vent)
RCS You need to prepare the side adapter separately.
SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You need to prepare the side adapter separately.
AM19 TREND-J
AM19 TREND-JJ
AM19 TREND-JC
AM19 STYLE-J
AM19 STYLE-JJ
AM19 STYLE-JC
AM19 SPORT-J
AM19 SPORT-JJ
AM19 SPORT-JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D
AM19 TREND-DC
AM19 STYLE-D
AM19 STYLE-DC
AM19 SPORT-D
AM19
TS-G / RS-G / TS-W / RS-W You need to prepare the side adapter separately.
SP-X
SR-6 / SR-7 / SR-7F / SR-11
Sportster / Cross Sportster
Taxes:

TVA / IVA / VAT: All import taxes (TVA / IVA / VAT) are included in our pricing. No other taxes will be charged to you during delivery!

Shipping:

This product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!
This part fits:

JCW Cooper | F56 | 2015-2017 | TC | B48A20O0 | I4