1991

{"id":2206046847087,"title":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda NSX NA1\/NA2","handle":"spoon-rigid-collar-kit-front-rear-honda-nsx-na1-na2-50261-na1-001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-NA1-001\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eNSX | NA1 | 1990-2005 | NA | C30A | V6\u003cbr\u003eNSX | NA2 | 1990-2005 | NA | C32B | V6\u003c!--split--\u003e","published_at":"2019-04-24T12:09:24+08:00","created_at":"2019-04-24T12:09:25+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","collar-kits","front","honda","NA1\/NA2","nsx-na1-1990-2005-na-c30a-v6","nsx-na2-1990-2005-na-c32b-v6","rear","rigid-collars","spoon","spoon19.7227208239646","tva"],"price":45960,"price_min":45960,"price_max":45960,"available":true,"price_varies":false,"compare_at_price":45960,"compare_at_price_min":45960,"compare_at_price_max":45960,"compare_at_price_varies":false,"variants":[{"id":20638475976815,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-NA1-001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda NSX NA1\/NA2","public_title":null,"options":["Default Title"],"price":45960,"weight":2100,"compare_at_price":45960,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f2518771-9ed3-49ce-9669-1d5c1ff25872.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f2518771-9ed3-49ce-9669-1d5c1ff25872.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda NSX NA1\/NA2 - 50261-NA1-001 - RZCrewEurope","id":1967729573999,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f2518771-9ed3-49ce-9669-1d5c1ff25872.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f2518771-9ed3-49ce-9669-1d5c1ff25872.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-NA1-001\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eNSX | NA1 | 1990-2005 | NA | C30A | V6\u003cbr\u003eNSX | NA2 | 1990-2005 | NA | C32B | V6\u003c!--split--\u003e"}

{"id":2206052253807,"title":"Spoon Rigid Collar Kit - Front \u0026 Rear - Mazda RX-7 FC3S","handle":"spoon-rigid-collar-kit-front-rear-mazda-rx-7-fc3s-50261-fc3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FC3-000\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-7 | FC3S | 1989-1991 | TC | 13B-T | R\u003cbr\u003eRX-7 | FC3S | 1985-1989 | TC | 13B-T | R\u003c!--split--\u003e","published_at":"2019-04-24T12:13:12+08:00","created_at":"2019-04-24T12:13:13+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1985","1986","1987","1988","1989","1990","1991","collar-kits","FC3S","front","mazda","rear","rigid-collars","rx-7-fc3s-1985-1989-tc-13b-t-r","rx-7-fc3s-1989-1991-tc-13b-t-r","spoon","spoon19.4868538344281","tva"],"price":38760,"price_min":38760,"price_max":38760,"available":true,"price_varies":false,"compare_at_price":38760,"compare_at_price_min":38760,"compare_at_price_max":38760,"compare_at_price_varies":false,"variants":[{"id":20638483415151,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-FC3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front \u0026 Rear - Mazda RX-7 FC3S","public_title":null,"options":["Default Title"],"price":38760,"weight":2100,"compare_at_price":38760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fed81300-acb6-49fb-859a-d87e3b80f446.jpg?v=1571709669"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fed81300-acb6-49fb-859a-d87e3b80f446.jpg?v=1571709669","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front \u0026 Rear - Mazda RX-7 FC3S - 50261-FC3-000 - RZCrewEurope","id":1967734980719,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fed81300-acb6-49fb-859a-d87e3b80f446.jpg?v=1571709669"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fed81300-acb6-49fb-859a-d87e3b80f446.jpg?v=1571709669","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FC3-000\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-7 | FC3S | 1989-1991 | TC | 13B-T | R\u003cbr\u003eRX-7 | FC3S | 1985-1989 | TC | 13B-T | R\u003c!--split--\u003e"}

{"id":2206039638127,"title":"Spoon Rigid Collar Kit - Front - Honda Accord Coupe CB6","handle":"spoon-rigid-collar-kit-front-honda-accord-coupe-cb6-50261-bb8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord Coupe | CB6 | 1990-1994 | NA | F20A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:04:45+08:00","created_at":"2019-04-24T12:04:46+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","accord-coupe-cb6-1990-1994-na-f20a-i4","CB6","collar-kits","front","honda","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638461657199,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-BB8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Accord Coupe CB6","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e89d8553-812d-46a1-be72-958a0144c229.jpg?v=1571709659"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e89d8553-812d-46a1-be72-958a0144c229.jpg?v=1571709659","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Accord Coupe CB6 - 50261-BB8-000 - RZCrewEurope","id":1967723446383,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e89d8553-812d-46a1-be72-958a0144c229.jpg?v=1571709659"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_e89d8553-812d-46a1-be72-958a0144c229.jpg?v=1571709659","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord Coupe | CB6 | 1990-1994 | NA | F20A | I4\u003c!--split--\u003e"}

{"id":2206038622319,"title":"Spoon Rigid Collar Kit - Front - Honda Beat PP1","handle":"spoon-rigid-collar-kit-front-honda-beat-pp1-50261-pp1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-PP1-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBeat | PP1 | 1991-1996 | NA | E07A | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:04:08+08:00","created_at":"2019-04-24T12:04:08+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","beat-pp1-1991-1996-na-e07a-i3","collar-kits","front","honda","PP1","rigid-collars","spoon","spoon18.3737307721342","tva"],"price":21240,"price_min":21240,"price_max":21240,"available":true,"price_varies":false,"compare_at_price":21240,"compare_at_price_min":21240,"compare_at_price_max":21240,"compare_at_price_varies":false,"variants":[{"id":20638458380399,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-PP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Beat PP1","public_title":null,"options":["Default Title"],"price":21240,"weight":2100,"compare_at_price":21240,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_2218d778-2521-4e06-8d91-251f2fb97527.jpg?v=1571709658"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_2218d778-2521-4e06-8d91-251f2fb97527.jpg?v=1571709658","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Beat PP1 - 50261-PP1-000 - RZCrewEurope","id":1967722627183,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_2218d778-2521-4e06-8d91-251f2fb97527.jpg?v=1571709658"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_2218d778-2521-4e06-8d91-251f2fb97527.jpg?v=1571709658","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-PP1-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBeat | PP1 | 1991-1996 | NA | E07A | I3\u003c!--split--\u003e"}

{"id":2206042325103,"title":"Spoon Rigid Collar Kit - Front - Honda Civic EF1\/EF2\/EF3\/EF9","handle":"spoon-rigid-collar-kit-front-honda-civic-ef1-ef2-ef3-ef9-50261-ef8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-EF8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EF1 | 1988-1991 | NA | D13B1 | I4\u003cbr\u003eCivic | EF2 | 1988-1991 | NA | D15B | I4\u003cbr\u003eCivic | EF3 | 1988-1991 | NA | ZC DOHC | I4\u003cbr\u003eCivic | EF9 | 1989-1991 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:06:43+08:00","created_at":"2019-04-24T12:06:44+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1988","1989","1990","1991","civic-ef1-1988-1991-na-d13b1-i4","civic-ef2-1988-1991-na-d15b-i4","civic-ef3-1988-1991-na-zc-dohc-i4","civic-ef9-1989-1991-na-b16a-i4","collar-kits","EF1\/EF2\/EF3\/EF9","front","honda","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638470897775,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-EF8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Civic EF1\/EF2\/EF3\/EF9","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_a7f0003d-fae4-4b76-a399-2c45c3d7fe50.jpg?v=1571709661"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_a7f0003d-fae4-4b76-a399-2c45c3d7fe50.jpg?v=1571709661","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Civic EF1\/EF2\/EF3\/EF9 - 50261-EF8-000 - RZCrewEurope","id":1967726166127,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_a7f0003d-fae4-4b76-a399-2c45c3d7fe50.jpg?v=1571709661"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_a7f0003d-fae4-4b76-a399-2c45c3d7fe50.jpg?v=1571709661","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-EF8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EF1 | 1988-1991 | NA | D13B1 | I4\u003cbr\u003eCivic | EF2 | 1988-1991 | NA | D15B | I4\u003cbr\u003eCivic | EF3 | 1988-1991 | NA | ZC DOHC | I4\u003cbr\u003eCivic | EF9 | 1989-1991 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":2206039244911,"title":"Spoon Rigid Collar Kit - Front - Honda CR-X EF6\/EF7\/EF8","handle":"spoon-rigid-collar-kit-front-honda-cr-x-ef6-ef7-ef8-50261-ef8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-EF8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-X | EF6 | 1988-1992 | NA | D15B | I4\u003cbr\u003eCR-X | EF7 | 1988-1992 | NA | ZC DOHC | I4\u003cbr\u003eCR-X | EF8 | 1989-1992 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:04:29+08:00","created_at":"2019-04-24T12:04:30+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1988","1989","1990","1991","1992","collar-kits","cr-x-ef6-1988-1992-na-d15b-i4","cr-x-ef7-1988-1992-na-zc-dohc-i4","cr-x-ef8-1989-1992-na-b16a-i4","EF6\/EF7\/EF8","front","honda","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638460280943,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-EF8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda CR-X EF6\/EF7\/EF8","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_a46301df-e5df-48e1-9f61-c226f2bc2d54.jpg?v=1571709658"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_a46301df-e5df-48e1-9f61-c226f2bc2d54.jpg?v=1571709658","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda CR-X EF6\/EF7\/EF8 - 50261-EF8-000 - RZCrewEurope","id":1967723085935,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_a46301df-e5df-48e1-9f61-c226f2bc2d54.jpg?v=1571709658"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_a46301df-e5df-48e1-9f61-c226f2bc2d54.jpg?v=1571709658","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-EF8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-X | EF6 | 1988-1992 | NA | D15B | I4\u003cbr\u003eCR-X | EF7 | 1988-1992 | NA | ZC DOHC | I4\u003cbr\u003eCR-X | EF8 | 1989-1992 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":2206046060655,"title":"Spoon Rigid Collar Kit - Front - Honda Stepwagon BB1\/BB4\/BB5\/BB6","handle":"spoon-rigid-collar-kit-front-honda-stepwagon-bb1-bb4-bb5-bb6-50261-bb8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:08:52+08:00","created_at":"2019-04-24T12:08:52+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","BB1\/BB4\/BB5\/BB6","collar-kits","front","honda","prelude-bb1-1991-1996-na-h22a-i4","prelude-bb4-1991-1996-na-h22a-i4","prelude-bb5-1996-2001-na-f22b-i4","prelude-bb6-1996-2001-na-h22a-i4","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475124847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-BB8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Stepwagon BB1\/BB4\/BB5\/BB6","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c4b69fc3-e80a-4263-991b-e70fb6574e48.jpg?v=1571709663"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c4b69fc3-e80a-4263-991b-e70fb6574e48.jpg?v=1571709663","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Stepwagon BB1\/BB4\/BB5\/BB6 - 50261-BB8-000 - RZCrewEurope","id":1967728918639,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c4b69fc3-e80a-4263-991b-e70fb6574e48.jpg?v=1571709663"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_c4b69fc3-e80a-4263-991b-e70fb6574e48.jpg?v=1571709663","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003c!--split--\u003e"}

{"id":2206038556783,"title":"Spoon Rigid Collar Kit - Front - Honda Today JA4\/JW3","handle":"spoon-rigid-collar-kit-front-honda-today-ja4-jw3-50261-jw3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-JW3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eToday | JA4 | 1985-1998 | NA | E07A | I3\u003cbr\u003eToday | JW3 | 1985-1998 | NA | E07A | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:04:05+08:00","created_at":"2019-04-24T12:04:05+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","collar-kits","front","honda","JA4\/JW3","rigid-collars","spoon","spoon18.3737307721342","today-ja4-1985-1998-na-e07a-i3","today-jw3-1985-1998-na-e07a-i3","tva"],"price":21240,"price_min":21240,"price_max":21240,"available":true,"price_varies":false,"compare_at_price":21240,"compare_at_price_min":21240,"compare_at_price_max":21240,"compare_at_price_varies":false,"variants":[{"id":20638458118255,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-JW3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Today JA4\/JW3","public_title":null,"options":["Default Title"],"price":21240,"weight":2100,"compare_at_price":21240,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_61e79494-2a7c-45e6-a402-4c1e21425ff2.jpg?v=1571709658"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_61e79494-2a7c-45e6-a402-4c1e21425ff2.jpg?v=1571709658","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Today JA4\/JW3 - 50261-JW3-000 - RZCrewEurope","id":1967722561647,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_61e79494-2a7c-45e6-a402-4c1e21425ff2.jpg?v=1571709658"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_61e79494-2a7c-45e6-a402-4c1e21425ff2.jpg?v=1571709658","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-JW3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eToday | JA4 | 1985-1998 | NA | E07A | I3\u003cbr\u003eToday | JW3 | 1985-1998 | NA | E07A | I3\u003c!--split--\u003e"}

{"id":2206052089967,"title":"Spoon Rigid Collar Kit - Front - Mazda Familia BG5P","handle":"spoon-rigid-collar-kit-front-mazda-familia-bg5p-50261-bg5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BG5-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFamilia | BG5P | 1991-1994 | NA | B5 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:13:05+08:00","created_at":"2019-04-24T12:13:06+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","BG5P","collar-kits","familia-bg5p-1991-1994-na-b5-i4","front","mazda","rigid-collars","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638483251311,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-BG5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Mazda Familia BG5P","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0798dd4b-36ea-4909-bed4-3e41d912f038.jpg?v=1571709668"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0798dd4b-36ea-4909-bed4-3e41d912f038.jpg?v=1571709668","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Mazda Familia BG5P - 50261-BG5-000 - RZCrewEurope","id":1967734816879,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0798dd4b-36ea-4909-bed4-3e41d912f038.jpg?v=1571709668"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0798dd4b-36ea-4909-bed4-3e41d912f038.jpg?v=1571709668","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BG5-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFamilia | BG5P | 1991-1994 | NA | B5 | I4\u003c!--split--\u003e"}

{"id":2206051270767,"title":"Spoon Rigid Collar Kit - Front - Nissan Pulsar RNN14","handle":"spoon-rigid-collar-kit-front-nissan-pulsar-rnn14-50261-rnn-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-RNN-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:12:27+08:00","created_at":"2019-04-24T12:12:27+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","1995","collar-kits","front","nissan","pulsar-rnn14-kouki-1992-1995-tc-sr20det-i4","pulsar-rnn14-zenki-1990-1992-tc-sr20det-i4","rigid-collars","RNN14","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638482169967,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-RNN-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Pulsar RNN14","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5bd95131-3061-4ee2-8441-38b7fd1f5094.jpg?v=1571709668"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5bd95131-3061-4ee2-8441-38b7fd1f5094.jpg?v=1571709668","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Pulsar RNN14 - 50261-RNN-000 - RZCrewEurope","id":1967733997679,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5bd95131-3061-4ee2-8441-38b7fd1f5094.jpg?v=1571709668"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_5bd95131-3061-4ee2-8441-38b7fd1f5094.jpg?v=1571709668","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-RNN-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e"}

{"id":2206046486639,"title":"Spoon Rigid Collar Kit - Front - Subaru Justy KA7","handle":"spoon-rigid-collar-kit-front-subaru-justy-ka7-50261-ka7-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-KA7-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA7 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:09:11+08:00","created_at":"2019-04-24T12:09:12+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","collar-kits","front","justy-ka7-1989-1994-na-ef12-i3","KA7","rigid-collars","spoon","spoon18.8108236846911","subaru","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475616367,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-KA7-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Subaru Justy KA7","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_442dadb8-c3f3-4695-aa91-1181ffde6ea0.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_442dadb8-c3f3-4695-aa91-1181ffde6ea0.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Subaru Justy KA7 - 50261-KA7-000 - RZCrewEurope","id":1967729279087,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_442dadb8-c3f3-4695-aa91-1181ffde6ea0.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_442dadb8-c3f3-4695-aa91-1181ffde6ea0.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-KA7-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA7 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e"}

{"id":2206046584943,"title":"Spoon Rigid Collar Kit - Front - Subaru Justy KA8","handle":"spoon-rigid-collar-kit-front-subaru-justy-ka8-50261-ka8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-KA8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA8 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:09:14+08:00","created_at":"2019-04-24T12:09:15+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","collar-kits","front","justy-ka8-1989-1994-na-ef12-i3","KA8","rigid-collars","spoon","spoon18.8108236846911","subaru","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475714671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-KA8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Subaru Justy KA8","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dc8cc3aa-4c9a-45bd-ae1b-eb5121b4ea24.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dc8cc3aa-4c9a-45bd-ae1b-eb5121b4ea24.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Subaru Justy KA8 - 50261-KA8-000 - RZCrewEurope","id":1967729344623,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dc8cc3aa-4c9a-45bd-ae1b-eb5121b4ea24.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dc8cc3aa-4c9a-45bd-ae1b-eb5121b4ea24.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-KA8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA8 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e"}

{"id":2206053892207,"title":"Spoon Rigid Collar Kit - Front - Subaru SVX Alcione CXW","handle":"spoon-rigid-collar-kit-front-subaru-svx-alcione-cxw-50261-cxw-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-CXW-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSVX Alcione | CXW | 1991-1996 | NA | EG33 | H6\u003c!--split--\u003e","published_at":"2019-04-24T12:14:29+08:00","created_at":"2019-04-24T12:14:30+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","collar-kits","CXW","front","rigid-collars","spoon","spoon18.9644247317924","subaru","svx-alcione-cxw-1991-1996-na-eg33-h6","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638485119087,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-CXW-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Subaru SVX Alcione CXW","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b1bebb4a-2bb6-46c9-b373-988e24404a87.jpg?v=1571709670"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b1bebb4a-2bb6-46c9-b373-988e24404a87.jpg?v=1571709670","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Subaru SVX Alcione CXW - 50261-CXW-000 - RZCrewEurope","id":1967736586351,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b1bebb4a-2bb6-46c9-b373-988e24404a87.jpg?v=1571709670"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b1bebb4a-2bb6-46c9-b373-988e24404a87.jpg?v=1571709670","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-CXW-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSVX Alcione | CXW | 1991-1996 | NA | EG33 | H6\u003c!--split--\u003e"}

{"id":2206047600751,"title":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T","handle":"spoon-rigid-collar-kit-front-toyota-mr-2-sw20-na-t-50261-sw2-1000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-SW2-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:09:50+08:00","created_at":"2019-04-24T12:09:51+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","collar-kits","front","mr-2-sw20-1989-1999-na-3s-ge-i4","mr-2-sw20-1989-1999-tc-3s-gte-i4","rigid-collars","spoon","spoon18.9644247317924","SW20 Na\/T","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638477549679,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-SW2-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f4d97b72-f3c1-4887-b22a-1c41c3d975d5.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f4d97b72-f3c1-4887-b22a-1c41c3d975d5.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T - 50261-SW2-1000 - RZCrewEurope","id":1967730393199,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f4d97b72-f3c1-4887-b22a-1c41c3d975d5.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f4d97b72-f3c1-4887-b22a-1c41c3d975d5.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-SW2-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e"}

{"id":2206039670895,"title":"Spoon Rigid Collar Kit - Rear - Honda Accord Coupe CB6","handle":"spoon-rigid-collar-kit-rear-honda-accord-coupe-cb6-50300-bb6-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BB6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord Coupe | CB6 | 1990-1994 | NA | F20A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:04:46+08:00","created_at":"2019-04-24T12:04:47+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","accord-coupe-cb6-1990-1994-na-f20a-i4","CB6","collar-kits","honda","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638461821039,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-BB6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Accord Coupe CB6","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0ebff338-f2eb-4215-8f8c-077e86e3a79b.jpg?v=1571709659"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0ebff338-f2eb-4215-8f8c-077e86e3a79b.jpg?v=1571709659","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Accord Coupe CB6 - 50300-BB6-000 - RZCrewEurope","id":1967723479151,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0ebff338-f2eb-4215-8f8c-077e86e3a79b.jpg?v=1571709659"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0ebff338-f2eb-4215-8f8c-077e86e3a79b.jpg?v=1571709659","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BB6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord Coupe | CB6 | 1990-1994 | NA | F20A | I4\u003c!--split--\u003e"}

{"id":2206038655087,"title":"Spoon Rigid Collar Kit - Rear - Honda Beat PP1","handle":"spoon-rigid-collar-kit-rear-honda-beat-pp1-50300-pp1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-PP1-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBeat | PP1 | 1991-1996 | NA | E07A | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:04:09+08:00","created_at":"2019-04-24T12:04:10+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","beat-pp1-1991-1996-na-e07a-i3","collar-kits","honda","PP1","rear","rigid-collars","spoon","spoon18.3737307721342","tva"],"price":21240,"price_min":21240,"price_max":21240,"available":true,"price_varies":false,"compare_at_price":21240,"compare_at_price_min":21240,"compare_at_price_max":21240,"compare_at_price_varies":false,"variants":[{"id":20638458478703,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-PP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Beat PP1","public_title":null,"options":["Default Title"],"price":21240,"weight":2100,"compare_at_price":21240,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_4631d6ac-b943-4f29-b566-623031261eff.jpg?v=1571709658"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_4631d6ac-b943-4f29-b566-623031261eff.jpg?v=1571709658","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Beat PP1 - 50300-PP1-000 - RZCrewEurope","id":1967722659951,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_4631d6ac-b943-4f29-b566-623031261eff.jpg?v=1571709658"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_4631d6ac-b943-4f29-b566-623031261eff.jpg?v=1571709658","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-PP1-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBeat | PP1 | 1991-1996 | NA | E07A | I3\u003c!--split--\u003e"}

{"id":2206042357871,"title":"Spoon Rigid Collar Kit - Rear - Honda Civic EF1\/EF2\/EF3\/EF9","handle":"spoon-rigid-collar-kit-rear-honda-civic-ef1-ef2-ef3-ef9-50300-eka-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EKA-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EF1 | 1988-1991 | NA | D13B1 | I4\u003cbr\u003eCivic | EF2 | 1988-1991 | NA | D15B | I4\u003cbr\u003eCivic | EF3 | 1988-1991 | NA | ZC DOHC | I4\u003cbr\u003eCivic | EF9 | 1989-1991 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:06:45+08:00","created_at":"2019-04-24T12:06:46+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1988","1989","1990","1991","civic-ef1-1988-1991-na-d13b1-i4","civic-ef2-1988-1991-na-d15b-i4","civic-ef3-1988-1991-na-zc-dohc-i4","civic-ef9-1989-1991-na-b16a-i4","collar-kits","EF1\/EF2\/EF3\/EF9","honda","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638470930543,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-EKA-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Civic EF1\/EF2\/EF3\/EF9","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b0311556-b739-4bc5-b93b-b8deb3bba097.jpg?v=1571709661"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b0311556-b739-4bc5-b93b-b8deb3bba097.jpg?v=1571709661","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Civic EF1\/EF2\/EF3\/EF9 - 50300-EKA-000 - RZCrewEurope","id":1967726198895,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b0311556-b739-4bc5-b93b-b8deb3bba097.jpg?v=1571709661"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_b0311556-b739-4bc5-b93b-b8deb3bba097.jpg?v=1571709661","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EKA-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EF1 | 1988-1991 | NA | D13B1 | I4\u003cbr\u003eCivic | EF2 | 1988-1991 | NA | D15B | I4\u003cbr\u003eCivic | EF3 | 1988-1991 | NA | ZC DOHC | I4\u003cbr\u003eCivic | EF9 | 1989-1991 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":2206039277679,"title":"Spoon Rigid Collar Kit - Rear - Honda CR-X EF6\/EF7\/EF8","handle":"spoon-rigid-collar-kit-rear-honda-cr-x-ef6-ef7-ef8-50300-eka-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EKA-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-X | EF6 | 1988-1992 | NA | D15B | I4\u003cbr\u003eCR-X | EF7 | 1988-1992 | NA | ZC DOHC | I4\u003cbr\u003eCR-X | EF8 | 1989-1992 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:04:30+08:00","created_at":"2019-04-24T12:04:31+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1988","1989","1990","1991","1992","collar-kits","cr-x-ef6-1988-1992-na-d15b-i4","cr-x-ef7-1988-1992-na-zc-dohc-i4","cr-x-ef8-1989-1992-na-b16a-i4","EF6\/EF7\/EF8","honda","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638460444783,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-EKA-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda CR-X EF6\/EF7\/EF8","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0ef3a598-2428-4e3d-b282-64221e1dd70d.jpg?v=1571709658"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0ef3a598-2428-4e3d-b282-64221e1dd70d.jpg?v=1571709658","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda CR-X EF6\/EF7\/EF8 - 50300-EKA-000 - RZCrewEurope","id":1967723118703,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0ef3a598-2428-4e3d-b282-64221e1dd70d.jpg?v=1571709658"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_0ef3a598-2428-4e3d-b282-64221e1dd70d.jpg?v=1571709658","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EKA-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-X | EF6 | 1988-1992 | NA | D15B | I4\u003cbr\u003eCR-X | EF7 | 1988-1992 | NA | ZC DOHC | I4\u003cbr\u003eCR-X | EF8 | 1989-1992 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":2206046126191,"title":"Spoon Rigid Collar Kit - Rear - Honda Stepwagon BB1\/BB4\/BB5\/BB6","handle":"spoon-rigid-collar-kit-rear-honda-stepwagon-bb1-bb4-bb5-bb6-50300-bb6-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BB6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:08:53+08:00","created_at":"2019-04-24T12:08:54+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","BB1\/BB4\/BB5\/BB6","collar-kits","honda","prelude-bb1-1991-1996-na-h22a-i4","prelude-bb4-1991-1996-na-h22a-i4","prelude-bb5-1996-2001-na-f22b-i4","prelude-bb6-1996-2001-na-h22a-i4","rear","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475223151,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-BB6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Stepwagon BB1\/BB4\/BB5\/BB6","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_30a48e84-9e8b-45f5-98e8-d0daa4bd4ba6.jpg?v=1571709663"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_30a48e84-9e8b-45f5-98e8-d0daa4bd4ba6.jpg?v=1571709663","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Stepwagon BB1\/BB4\/BB5\/BB6 - 50300-BB6-000 - RZCrewEurope","id":1967728951407,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_30a48e84-9e8b-45f5-98e8-d0daa4bd4ba6.jpg?v=1571709663"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_30a48e84-9e8b-45f5-98e8-d0daa4bd4ba6.jpg?v=1571709663","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BB6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003c!--split--\u003e"}

{"id":2206038589551,"title":"Spoon Rigid Collar Kit - Rear - Honda Today JA4\/JW3","handle":"spoon-rigid-collar-kit-rear-honda-today-ja4-jw3-50300-jb2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-JB2-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eToday | JA4 | 1985-1998 | NA | E07A | I3\u003cbr\u003eToday | JW3 | 1985-1998 | NA | E07A | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:04:06+08:00","created_at":"2019-04-24T12:04:07+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","collar-kits","honda","JA4\/JW3","rear","rigid-collars","spoon","spoon18.4413470431619","today-ja4-1985-1998-na-e07a-i3","today-jw3-1985-1998-na-e07a-i3","tva"],"price":9600,"price_min":9600,"price_max":9600,"available":true,"price_varies":false,"compare_at_price":9600,"compare_at_price_min":9600,"compare_at_price_max":9600,"compare_at_price_varies":false,"variants":[{"id":20638458282095,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-JB2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Today JA4\/JW3","public_title":null,"options":["Default Title"],"price":9600,"weight":2100,"compare_at_price":9600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_9503712b-f1ec-444f-8eb6-8d6e7174a42c.jpg?v=1571709658"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_9503712b-f1ec-444f-8eb6-8d6e7174a42c.jpg?v=1571709658","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Today JA4\/JW3 - 50300-JB2-000 - RZCrewEurope","id":1967722594415,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_9503712b-f1ec-444f-8eb6-8d6e7174a42c.jpg?v=1571709658"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_9503712b-f1ec-444f-8eb6-8d6e7174a42c.jpg?v=1571709658","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-JB2-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eToday | JA4 | 1985-1998 | NA | E07A | I3\u003cbr\u003eToday | JW3 | 1985-1998 | NA | E07A | I3\u003c!--split--\u003e"}

{"id":2206052122735,"title":"Spoon Rigid Collar Kit - Rear - Mazda Familia BG5P","handle":"spoon-rigid-collar-kit-rear-mazda-familia-bg5p-50300-bg5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BG5-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFamilia | BG5P | 1991-1994 | NA | B5 | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:13:06+08:00","created_at":"2019-04-24T12:13:07+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","BG5P","collar-kits","familia-bg5p-1991-1994-na-b5-i4","mazda","rear","rigid-collars","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638483284079,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-BG5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Mazda Familia BG5P","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3ad0984b-184b-4a54-a459-2176f30db2e2.jpg?v=1571709668"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3ad0984b-184b-4a54-a459-2176f30db2e2.jpg?v=1571709668","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Mazda Familia BG5P - 50300-BG5-000 - RZCrewEurope","id":1967734849647,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3ad0984b-184b-4a54-a459-2176f30db2e2.jpg?v=1571709668"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_3ad0984b-184b-4a54-a459-2176f30db2e2.jpg?v=1571709668","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-BG5-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFamilia | BG5P | 1991-1994 | NA | B5 | I4\u003c!--split--\u003e"}

{"id":2206051303535,"title":"Spoon Rigid Collar Kit - Rear - Nissan Pulsar RNN14","handle":"spoon-rigid-collar-kit-rear-nissan-pulsar-rnn14-50300-z32-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-Z32-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:12:30+08:00","created_at":"2019-04-24T12:12:31+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","1995","collar-kits","nissan","pulsar-rnn14-kouki-1992-1995-tc-sr20det-i4","pulsar-rnn14-zenki-1990-1992-tc-sr20det-i4","rear","rigid-collars","RNN14","spoon","spoon18.9644247317924","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638482202735,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-Z32-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Nissan Pulsar RNN14","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dd4dd98c-83e6-4cb6-acb8-e751cfaa583a.jpg?v=1571709668"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dd4dd98c-83e6-4cb6-acb8-e751cfaa583a.jpg?v=1571709668","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Nissan Pulsar RNN14 - 50300-Z32-000 - RZCrewEurope","id":1967734030447,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dd4dd98c-83e6-4cb6-acb8-e751cfaa583a.jpg?v=1571709668"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_dd4dd98c-83e6-4cb6-acb8-e751cfaa583a.jpg?v=1571709668","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-Z32-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e"}

{"id":2206046519407,"title":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA7","handle":"spoon-rigid-collar-kit-rear-subaru-justy-ka7-50300-ka8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-KA8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA7 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:09:12+08:00","created_at":"2019-04-24T12:09:13+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","collar-kits","justy-ka7-1989-1994-na-ef12-i3","KA7","rear","rigid-collars","spoon","spoon18.8108236846911","subaru","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475649135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-KA8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA7","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fbe3a135-f2c4-4a87-8f8e-e08adcceec06.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fbe3a135-f2c4-4a87-8f8e-e08adcceec06.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA7 - 50300-KA8-000 - RZCrewEurope","id":1967729311855,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fbe3a135-f2c4-4a87-8f8e-e08adcceec06.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_fbe3a135-f2c4-4a87-8f8e-e08adcceec06.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-KA8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA7 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e"}

{"id":2206046617711,"title":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA8","handle":"spoon-rigid-collar-kit-rear-subaru-justy-ka8-50300-ka8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-KA8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA8 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e","published_at":"2019-04-24T12:09:15+08:00","created_at":"2019-04-24T12:09:16+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","collar-kits","justy-ka8-1989-1994-na-ef12-i3","KA8","rear","rigid-collars","spoon","spoon18.8108236846911","subaru","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638475747439,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-KA8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA8","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_cf374960-d4e3-463d-ad65-134edbeaa777.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_cf374960-d4e3-463d-ad65-134edbeaa777.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Subaru Justy KA8 - 50300-KA8-000 - RZCrewEurope","id":1967729377391,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_cf374960-d4e3-463d-ad65-134edbeaa777.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_cf374960-d4e3-463d-ad65-134edbeaa777.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-KA8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJusty | KA8 | 1989-1994 | NA | EF12 | I3\u003c!--split--\u003e"}

{"id":2206053924975,"title":"Spoon Rigid Collar Kit - Rear - Subaru SVX Alcione CXW","handle":"spoon-rigid-collar-kit-rear-subaru-svx-alcione-cxw-50300-cxw-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-CXW-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSVX Alcione | CXW | 1991-1996 | NA | EG33 | H6\u003c!--split--\u003e","published_at":"2019-04-24T12:14:30+08:00","created_at":"2019-04-24T12:14:31+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","collar-kits","CXW","rear","rigid-collars","spoon","spoon18.9644247317924","subaru","svx-alcione-cxw-1991-1996-na-eg33-h6","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638485151855,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-CXW-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Subaru SVX Alcione CXW","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_435bce61-a68c-4871-bbb5-bc9f4fede002.jpg?v=1571709670"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_435bce61-a68c-4871-bbb5-bc9f4fede002.jpg?v=1571709670","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Subaru SVX Alcione CXW - 50300-CXW-000 - RZCrewEurope","id":1967736619119,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_435bce61-a68c-4871-bbb5-bc9f4fede002.jpg?v=1571709670"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_435bce61-a68c-4871-bbb5-bc9f4fede002.jpg?v=1571709670","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-CXW-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSVX Alcione | CXW | 1991-1996 | NA | EG33 | H6\u003c!--split--\u003e"}

{"id":2206047633519,"title":"Spoon Rigid Collar Kit - Rear - Toyota MR-2 SW20 Na\/T","handle":"spoon-rigid-collar-kit-rear-toyota-mr-2-sw20-na-t-50300-sw2-1000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-SW2-1000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e","published_at":"2019-04-24T12:09:51+08:00","created_at":"2019-04-24T12:09:52+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","collar-kits","mr-2-sw20-1989-1999-na-3s-ge-i4","mr-2-sw20-1989-1999-tc-3s-gte-i4","rear","rigid-collars","spoon","spoon18.9644247317924","SW20 Na\/T","toyota","tva"],"price":29400,"price_min":29400,"price_max":29400,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":20638477582447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-SW2-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Toyota MR-2 SW20 Na\/T","public_title":null,"options":["Default Title"],"price":29400,"weight":2100,"compare_at_price":29400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_58a22335-da76-4ace-8a28-cd9f8b413fe3.jpg?v=1571709664"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_58a22335-da76-4ace-8a28-cd9f8b413fe3.jpg?v=1571709664","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Toyota MR-2 SW20 Na\/T - 50300-SW2-1000 - RZCrewEurope","id":1967730425967,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_58a22335-da76-4ace-8a28-cd9f8b413fe3.jpg?v=1571709664"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_58a22335-da76-4ace-8a28-cd9f8b413fe3.jpg?v=1571709664","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-SW2-1000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e"}

{"id":1486224621679,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 10 Pieces - Honda Civic Coupe EJ1","handle":"super-rigid-sr-c-112","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-112\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Coupe | EJ1 | 1991-1995 | NA | D16A | I4\u003c!--split--\u003e","published_at":"2018-09-03T15:59:57+08:00","created_at":"2018-09-03T15:59:59+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","civic-coupe-ej1-1991-1995-na-d16a-i4","collar-kits","front","honda","rigid-collars","super-rigid","super-rigid49.9782123782641","tva"],"price":13836,"price_min":13836,"price_max":13836,"available":true,"price_varies":false,"compare_at_price":16560,"compare_at_price_min":16560,"compare_at_price_max":16560,"compare_at_price_varies":false,"variants":[{"id":13250805104751,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-112","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 10 Pieces - Honda Civic Coupe EJ1","public_title":null,"options":["Default Title"],"price":13836,"weight":450,"compare_at_price":16560,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_7015624d-7b5c-40ef-bfce-bd588aa73051.jpg?v=1571709486"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_7015624d-7b5c-40ef-bfce-bd588aa73051.jpg?v=1571709486","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-112 - RZCrewEurope","id":1967886925935,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_7015624d-7b5c-40ef-bfce-bd588aa73051.jpg?v=1571709486"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_7015624d-7b5c-40ef-bfce-bd588aa73051.jpg?v=1571709486","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-112\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Coupe | EJ1 | 1991-1995 | NA | D16A | I4\u003c!--split--\u003e"}

{"id":1486224818287,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 10 Pieces - Honda Civic Coupe EJ2","handle":"super-rigid-sr-c-114","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-114\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Coupe | EJ2 | 1991-1995 | NA | D15B7 | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:00:01+08:00","created_at":"2018-09-03T16:00:03+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","civic-coupe-ej2-1991-1995-na-d15b7-i4","collar-kits","front","honda","rigid-collars","super-rigid","super-rigid49.9782123782641","tva"],"price":13836,"price_min":13836,"price_max":13836,"available":true,"price_varies":false,"compare_at_price":16560,"compare_at_price_min":16560,"compare_at_price_max":16560,"compare_at_price_varies":false,"variants":[{"id":13250805334127,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-114","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 10 Pieces - Honda Civic Coupe EJ2","public_title":null,"options":["Default Title"],"price":13836,"weight":450,"compare_at_price":16560,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_99287135-3fb6-4379-875b-6e6ef223cf1b.jpg?v=1571709486"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_99287135-3fb6-4379-875b-6e6ef223cf1b.jpg?v=1571709486","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-114 - RZCrewEurope","id":1967887089775,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_99287135-3fb6-4379-875b-6e6ef223cf1b.jpg?v=1571709486"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_99287135-3fb6-4379-875b-6e6ef223cf1b.jpg?v=1571709486","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-114\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Coupe | EJ2 | 1991-1995 | NA | D15B7 | I4\u003c!--split--\u003e"}

{"id":1486217871471,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 6 Pieces - BMW E30 Coupe\/Sedan E30","handle":"super-rigid-sr-c-27","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-27\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series | E30 | 1984-1992 | NA | I4\u003cbr\u003e3 Series | E30 | 1984-1987 | NA | I6\u003cbr\u003e3 Series | E30 | 1984-1992 | NA | I4\u003cbr\u003e3 Series | E30 | 1984-1987 | NA | I6\u003c!--split--\u003e","published_at":"2018-09-03T15:57:43+08:00","created_at":"2018-09-03T15:57:44+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1984","1985","1986","1987","1988","1989","1990","1991","1992","3-series-e30-1984-1987-na-i6","3-series-e30-1984-1992-na-i4","bmw","collar-kits","front","rigid-collars","super-rigid","super-rigid49.78873591","tva"],"price":10692,"price_min":10692,"price_max":10692,"available":true,"price_varies":false,"compare_at_price":12720,"compare_at_price_min":12720,"compare_at_price_max":12720,"compare_at_price_varies":false,"variants":[{"id":13250741305455,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-27","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 6 Pieces - BMW E30 Coupe\/Sedan E30","public_title":null,"options":["Default Title"],"price":10692,"weight":450,"compare_at_price":12720,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_4d484e92-c12b-437a-a289-059e5d9634a7.jpg?v=1571709484"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_4d484e92-c12b-437a-a289-059e5d9634a7.jpg?v=1571709484","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-27 - RZCrewEurope","id":1967881781359,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_4d484e92-c12b-437a-a289-059e5d9634a7.jpg?v=1571709484"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_4d484e92-c12b-437a-a289-059e5d9634a7.jpg?v=1571709484","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-27\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series | E30 | 1984-1992 | NA | I4\u003cbr\u003e3 Series | E30 | 1984-1987 | NA | I6\u003cbr\u003e3 Series | E30 | 1984-1992 | NA | I4\u003cbr\u003e3 Series | E30 | 1984-1987 | NA | I6\u003c!--split--\u003e"}

{"id":1486217937007,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 6 Pieces - BMW E36 Coupe\/Sedan E36","handle":"super-rigid-sr-c-28","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-28\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series | E36 | 1990-2001 | NA | I4\u003cbr\u003e3 Series | E36 | 1991-1998 | NA | I6\u003c!--split--\u003e","published_at":"2018-09-03T15:57:44+08:00","created_at":"2018-09-03T15:57:46+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","3-series-e36-1990-2001-na-i4","3-series-e36-1991-1998-na-i6","bmw","collar-kits","front","rigid-collars","super-rigid","super-rigid49.6677449121928","tva"],"price":11088,"price_min":11088,"price_max":11088,"available":true,"price_varies":false,"compare_at_price":13200,"compare_at_price_min":13200,"compare_at_price_max":13200,"compare_at_price_varies":false,"variants":[{"id":13250741796975,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 6 Pieces - BMW E36 Coupe\/Sedan E36","public_title":null,"options":["Default Title"],"price":11088,"weight":450,"compare_at_price":13200,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_017ada75-438e-43ab-a989-65e8c476517a.jpg?v=1571709484"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_017ada75-438e-43ab-a989-65e8c476517a.jpg?v=1571709484","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-28 - RZCrewEurope","id":1967881846895,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_017ada75-438e-43ab-a989-65e8c476517a.jpg?v=1571709484"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_017ada75-438e-43ab-a989-65e8c476517a.jpg?v=1571709484","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-28\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series | E36 | 1990-2001 | NA | I4\u003cbr\u003e3 Series | E36 | 1991-1998 | NA | I6\u003c!--split--\u003e"}

{"id":1486231011439,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Honda Prelude BA4","handle":"super-rigid-sr-c-185","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-185\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BA4 | 1987-1991 | NA | B20A | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:02:10+08:00","created_at":"2018-09-03T16:02:12+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1987","1988","1989","1990","1991","collar-kits","front","honda","prelude-ba4-1987-1991-na-b20a-i4","rigid-collars","super-rigid","super-rigid50.0118970837333","tva"],"price":11868,"price_min":11868,"price_max":11868,"available":true,"price_varies":false,"compare_at_price":14160,"compare_at_price_min":14160,"compare_at_price_max":14160,"compare_at_price_varies":false,"variants":[{"id":13250863267951,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-185","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Honda Prelude BA4","public_title":null,"options":["Default Title"],"price":11868,"weight":450,"compare_at_price":14160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_04492ce1-704b-4da5-96c7-e06cf702cdd1.jpg?v=1571709489"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_04492ce1-704b-4da5-96c7-e06cf702cdd1.jpg?v=1571709489","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-185 - RZCrewEurope","id":1967892103279,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_04492ce1-704b-4da5-96c7-e06cf702cdd1.jpg?v=1571709489"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_04492ce1-704b-4da5-96c7-e06cf702cdd1.jpg?v=1571709489","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-185\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BA4 | 1987-1991 | NA | B20A | I4\u003c!--split--\u003e"}

{"id":1486231109743,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Honda Prelude BA5","handle":"super-rigid-sr-c-186","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-186\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BA5 | 1987-1991 | NA | B20A | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:02:12+08:00","created_at":"2018-09-03T16:02:14+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1987","1988","1989","1990","1991","collar-kits","front","honda","prelude-ba5-1987-1991-na-b20a-i4","rigid-collars","super-rigid","super-rigid50.0118970837333","tva"],"price":11868,"price_min":11868,"price_max":11868,"available":true,"price_varies":false,"compare_at_price":14160,"compare_at_price_min":14160,"compare_at_price_max":14160,"compare_at_price_varies":false,"variants":[{"id":13250866217071,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-186","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Honda Prelude BA5","public_title":null,"options":["Default Title"],"price":11868,"weight":450,"compare_at_price":14160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_677aa778-e72c-451c-a276-46dc0cb79ab8.jpg?v=1571709489"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_677aa778-e72c-451c-a276-46dc0cb79ab8.jpg?v=1571709489","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-186 - RZCrewEurope","id":1967892136047,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_677aa778-e72c-451c-a276-46dc0cb79ab8.jpg?v=1571709489"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_677aa778-e72c-451c-a276-46dc0cb79ab8.jpg?v=1571709489","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-186\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BA5 | 1987-1991 | NA | B20A | I4\u003c!--split--\u003e"}

{"id":1486231175279,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Honda Prelude BA7","handle":"super-rigid-sr-c-187","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-187\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BA7 | 1987-1991 | NA | B21A | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:02:14+08:00","created_at":"2018-09-03T16:02:15+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1987","1988","1989","1990","1991","collar-kits","front","honda","prelude-ba7-1987-1991-na-b21a-i4","rigid-collars","super-rigid","super-rigid50.0118970837333","tva"],"price":11868,"price_min":11868,"price_max":11868,"available":true,"price_varies":false,"compare_at_price":14160,"compare_at_price_min":14160,"compare_at_price_max":14160,"compare_at_price_varies":false,"variants":[{"id":13250867265647,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-187","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Honda Prelude BA7","public_title":null,"options":["Default Title"],"price":11868,"weight":450,"compare_at_price":14160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_4a16e92a-c7bc-433c-95f9-48a96bb07b03.jpg?v=1571709489"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_4a16e92a-c7bc-433c-95f9-48a96bb07b03.jpg?v=1571709489","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-187 - RZCrewEurope","id":1967892201583,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_4a16e92a-c7bc-433c-95f9-48a96bb07b03.jpg?v=1571709489"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_4a16e92a-c7bc-433c-95f9-48a96bb07b03.jpg?v=1571709489","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-187\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrelude | BA7 | 1987-1991 | NA | B21A | I4\u003c!--split--\u003e"}

{"id":1486235336815,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Mazda MX-5 Miata Roadster NA","handle":"super-rigid-sr-c-274","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-274\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NA8C Zenki | 1993-1995 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NA8C Kouki | 1995-1997 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NA6CE Zenki | 1989-1991 | NA | B6 | I4\u003cbr\u003eMX-5 Miata Roadster | NA6CE Kouki | 1991-1993 | NA | B6 | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:03:49+08:00","created_at":"2018-09-03T16:03:50+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","collar-kits","front","mazda","mx-5-miata-roadster-na6ce-kouki-1991-1993-na-b6-i4","mx-5-miata-roadster-na6ce-zenki-1989-1991-na-b6-i4","mx-5-miata-roadster-na8c-kouki-1995-1997-na-bp-i4","mx-5-miata-roadster-na8c-zenki-1993-1995-na-bp-i4","rigid-collars","super-rigid","super-rigid50.0118970837333","tva"],"price":11868,"price_min":11868,"price_max":11868,"available":true,"price_varies":false,"compare_at_price":14160,"compare_at_price_min":14160,"compare_at_price_max":14160,"compare_at_price_varies":false,"variants":[{"id":13250908881007,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-274","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Mazda MX-5 Miata Roadster NA","public_title":null,"options":["Default Title"],"price":11868,"weight":450,"compare_at_price":14160,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_040ab06c-7eac-4df7-8ee3-a8d9b039d2d9.jpg?v=1571709490"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_040ab06c-7eac-4df7-8ee3-a8d9b039d2d9.jpg?v=1571709490","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-274 - RZCrewEurope","id":1967895674991,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_040ab06c-7eac-4df7-8ee3-a8d9b039d2d9.jpg?v=1571709490"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_040ab06c-7eac-4df7-8ee3-a8d9b039d2d9.jpg?v=1571709490","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-274\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NA8C Zenki | 1993-1995 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NA8C Kouki | 1995-1997 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NA6CE Zenki | 1989-1991 | NA | B6 | I4\u003cbr\u003eMX-5 Miata Roadster | NA6CE Kouki | 1991-1993 | NA | B6 | I4\u003c!--split--\u003e"}

{"id":1486241136751,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Mitsubishi Mirage 4th Gen (All) Mirage4thGen","handle":"super-rigid-sr-c-374","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-374\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMirage | CA1A | 1991-1992 | NA | 4G13 | I4\u003cbr\u003eMirage | CA2A | 1994-1995 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CA2A | 1992-1993 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CA2A | 1991-1992 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CA3A | 1994-1995 | NA | 4G91 | I4\u003cbr\u003eMirage | CA3A | 1992-1993 | NA | 4G91 | I4\u003cbr\u003eMirage | CA3A | 1991-1992 | NA | 4G91 | I4\u003cbr\u003eMirage | CA4A | 1994-1995 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1992-1993 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1991-1992 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1991-1992 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1992-1993 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1994-1995 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CB1A | 1992-1993 | NA | 4G13 | I4\u003cbr\u003eMirage | CB1A | 1994-1995 | NA | 4G13 | I4\u003cbr\u003eMirage | CB1A | 1991-1992 | NA | 4G13 | I4\u003cbr\u003eMirage | CB2A | 1994-1995 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CB2A | 1992-1993 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CB2A | 1991-1992 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CB3A | 1994-1995 | NA | 4G91 | I4\u003cbr\u003eMirage | CB3A | 1992-1993 | NA | 4G91 | I4\u003cbr\u003eMirage | CB3A | 1991-1992 | NA | 4G91 | I4\u003cbr\u003eMirage | CB4A | 1994-1995 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CB4A | 1992-1993 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CB6A | 1994-1995 | NA | 6A10 | V6\u003cbr\u003eMirage | CB6A | 1992-1993 | NA | 6A10 | V6\u003cbr\u003eMirage | CC3A | 1994-1995 | NA | 4G91 | I4\u003cbr\u003eMirage | CC3A | 1992-1993 | NA | 4G91 | I4\u003cbr\u003eMirage | CC3A | 1991-1992 | NA | 4G91 | I4\u003cbr\u003eMirage | CC4A | 1994-1995 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CC4A | 1992-1993 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CC4A | 1991-1992 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CD3A | 1994-1995 | NA | 4G91 | I4\u003cbr\u003eMirage | CD3A | 1992-1993 | NA | 4G91 | I4\u003cbr\u003eMirage | CD3A | 1991-1992 | NA | 4G91 | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:05:49+08:00","created_at":"2018-09-03T16:05:50+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","collar-kits","front","mirage-ca1a-1991-1992-na-4g13-i4","mirage-ca2a-1991-1992-na-4g15-sohc-i4","mirage-ca2a-1992-1993-na-4g15-sohc-i4","mirage-ca2a-1994-1995-na-4g15-sohc-i4","mirage-ca3a-1991-1992-na-4g91-i4","mirage-ca3a-1992-1993-na-4g91-i4","mirage-ca3a-1994-1995-na-4g91-i4","mirage-ca4a-1991-1992-na-4g92-sohc-i4","mirage-ca4a-1992-1993-na-4g92-sohc-i4","mirage-ca4a-1994-1995-na-4g92-sohc-i4","mirage-cb1a-1991-1992-na-4g13-i4","mirage-cb1a-1992-1993-na-4g13-i4","mirage-cb1a-1994-1995-na-4g13-i4","mirage-cb2a-1991-1992-na-4g15-sohc-i4","mirage-cb2a-1992-1993-na-4g15-sohc-i4","mirage-cb2a-1994-1995-na-4g15-sohc-i4","mirage-cb3a-1991-1992-na-4g91-i4","mirage-cb3a-1992-1993-na-4g91-i4","mirage-cb3a-1994-1995-na-4g91-i4","mirage-cb4a-1992-1993-na-4g92-sohc-i4","mirage-cb4a-1994-1995-na-4g92-sohc-i4","mirage-cb6a-1992-1993-na-6a10-v6","mirage-cb6a-1994-1995-na-6a10-v6","mirage-cc3a-1991-1992-na-4g91-i4","mirage-cc3a-1992-1993-na-4g91-i4","mirage-cc3a-1994-1995-na-4g91-i4","mirage-cc4a-1991-1992-na-4g92-sohc-i4","mirage-cc4a-1992-1993-na-4g92-sohc-i4","mirage-cc4a-1994-1995-na-4g92-sohc-i4","mirage-cd3a-1991-1992-na-4g91-i4","mirage-cd3a-1992-1993-na-4g91-i4","mirage-cd3a-1994-1995-na-4g91-i4","mitsubishi","rigid-collars","super-rigid","super-rigid49.953363005377","tva"],"price":8328,"price_min":8328,"price_max":8328,"available":true,"price_varies":false,"compare_at_price":9840,"compare_at_price_min":9840,"compare_at_price_max":9840,"compare_at_price_varies":false,"variants":[{"id":13250963112047,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-374","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Mitsubishi Mirage 4th Gen (All) Mirage4thGen","public_title":null,"options":["Default Title"],"price":8328,"weight":450,"compare_at_price":9840,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_abdc9b12-f473-454c-b4ba-9bc649906791.jpg?v=1571709492"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_abdc9b12-f473-454c-b4ba-9bc649906791.jpg?v=1571709492","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-374 - RZCrewEurope","id":1967900295279,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_abdc9b12-f473-454c-b4ba-9bc649906791.jpg?v=1571709492"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_abdc9b12-f473-454c-b4ba-9bc649906791.jpg?v=1571709492","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-374\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMirage | CA1A | 1991-1992 | NA | 4G13 | I4\u003cbr\u003eMirage | CA2A | 1994-1995 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CA2A | 1992-1993 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CA2A | 1991-1992 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CA3A | 1994-1995 | NA | 4G91 | I4\u003cbr\u003eMirage | CA3A | 1992-1993 | NA | 4G91 | I4\u003cbr\u003eMirage | CA3A | 1991-1992 | NA | 4G91 | I4\u003cbr\u003eMirage | CA4A | 1994-1995 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1992-1993 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1991-1992 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1991-1992 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1992-1993 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CA4A | 1994-1995 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CB1A | 1992-1993 | NA | 4G13 | I4\u003cbr\u003eMirage | CB1A | 1994-1995 | NA | 4G13 | I4\u003cbr\u003eMirage | CB1A | 1991-1992 | NA | 4G13 | I4\u003cbr\u003eMirage | CB2A | 1994-1995 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CB2A | 1992-1993 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CB2A | 1991-1992 | NA | 4G15 SOHC | I4\u003cbr\u003eMirage | CB3A | 1994-1995 | NA | 4G91 | I4\u003cbr\u003eMirage | CB3A | 1992-1993 | NA | 4G91 | I4\u003cbr\u003eMirage | CB3A | 1991-1992 | NA | 4G91 | I4\u003cbr\u003eMirage | CB4A | 1994-1995 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CB4A | 1992-1993 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CB6A | 1994-1995 | NA | 6A10 | V6\u003cbr\u003eMirage | CB6A | 1992-1993 | NA | 6A10 | V6\u003cbr\u003eMirage | CC3A | 1994-1995 | NA | 4G91 | I4\u003cbr\u003eMirage | CC3A | 1992-1993 | NA | 4G91 | I4\u003cbr\u003eMirage | CC3A | 1991-1992 | NA | 4G91 | I4\u003cbr\u003eMirage | CC4A | 1994-1995 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CC4A | 1992-1993 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CC4A | 1991-1992 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CD3A | 1994-1995 | NA | 4G91 | I4\u003cbr\u003eMirage | CD3A | 1992-1993 | NA | 4G91 | I4\u003cbr\u003eMirage | CD3A | 1991-1992 | NA | 4G91 | I4\u003c!--split--\u003e"}

{"id":1486252834927,"title":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Toyota Corolla Levin\/Trueno\/Ceres AE100","handle":"super-rigid-sr-c-497","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-497\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLevin Trueno | AE100 | 1991-1993 | NA | 5A-FE | I4\u003cbr\u003eSprinter Marino | AE100 | 1992-1994 | NA | 5A-FE | I4\u003cbr\u003eCorolla Ceres | AE100 | 1991-1998 | NA | 5A-FE | I4\u003c!--split--\u003e","published_at":"2018-09-03T16:09:06+08:00","created_at":"2018-09-03T16:09:07+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1991","1992","1993","1994","1995","1996","1997","1998","collar-kits","corolla-ceres-ae100-1991-1998-na-5a-fe-i4","front","levin-trueno-ae100-1991-1993-na-5a-fe-i4","rigid-collars","sprinter-marino-ae100-1992-1994-na-5a-fe-i4","super-rigid","super-rigid50.135020489931","toyota","tva"],"price":11472,"price_min":11472,"price_max":11472,"available":true,"price_varies":false,"compare_at_price":13680,"compare_at_price_min":13680,"compare_at_price_max":13680,"compare_at_price_varies":false,"variants":[{"id":13251060498543,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-497","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Chassis Enhancement Ring Kit - Front 8 Pieces - Toyota Corolla Levin\/Trueno\/Ceres AE100","public_title":null,"options":["Default Title"],"price":11472,"weight":450,"compare_at_price":13680,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_d3b251cf-7791-4bc5-845c-a14cbc930b5a.jpg?v=1571709496"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_d3b251cf-7791-4bc5-845c-a14cbc930b5a.jpg?v=1571709496","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-497 - RZCrewEurope","id":1967907766383,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2644,"width":2644,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_d3b251cf-7791-4bc5-845c-a14cbc930b5a.jpg?v=1571709496"},"aspect_ratio":1.0,"height":2644,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SRSTD_d3b251cf-7791-4bc5-845c-a14cbc930b5a.jpg?v=1571709496","width":2644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-497\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 8 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to our European Warehouse and redistributed in Europe! Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLevin Trueno | AE100 | 1991-1993 | NA | 5A-FE | I4\u003cbr\u003eSprinter Marino | AE100 | 1992-1994 | NA | 5A-FE | I4\u003cbr\u003eCorolla Ceres | AE100 | 1991-1998 | NA | 5A-FE | I4\u003c!--split--\u003e"}